Meaning of value 2

Enter Value 2 in the Technique tab of the Properties of:<module name/module group name> dialog box. The meaning of the entry is dependent on the machine type.

With Narrowing and widening modules the entry in the Value 2 input field has the following meaning:

Input

Meaning (with k&w only)

: If you want to use different narrowing modules at one fabric edge then you have to define different edges in the shape editor or different edge colors in the shape view.
As an other possibility you can insert different modules by the definition of the Value2.
Values greater than 1000 specify the order of the module insert.

1001

First module which will be inserted at the edge.
The insert starts at the beginning of the edge.

1002

Second module which will be inserted at the edge.

1003

Third module which will be inserted at the edge.

n

Further modules which will be inserted at the edge.

With narrowing and widening modules on a TC-R machine the entry in the Value2 input field has the following meaning:

Input

Meaning (with fully fashion only)

: The distance between left and right shape edge within the cut-out is checked according to this value. There have to be two module with different values.
Example:

-2

The module is inserted with a distance of less than 2 needles from the shape edge (cut-out) by the entry of -2.

2

The module is inserted with a distance of two or more needles from the shape edge (cut-out) by the entry of 2.

With fair isle narrowing modules on a TC-T machine the entry in the Value2 input field has the following meaning:

Input

Meaning

10001

The narrowed stitches lie on the stitches of the basic fabric (above)

10002

The narrowed stitches lie under the stitches of the basic fabric (underneath)