Devoré knit Twill

Please find the Devoré knit Twill Jacquard-module here:

Jacquard

 

Stoll

 

Devoré knit/Plush

 

 

2-color

 

 

 

Devoré knit Twill

Create the devoré pattern and insert the jacquard:

    1
    Draw the devoré design with two different yarn colors or yarn carrier colors.

 

    2
    Call up the Jacquards dialog box via the Edit / Generate or Edit Jacquard... menu.
    3
    Create a row selection of the motif height.
    4
    Select the jacquard type Devoré knit Twill under the section Jacquard / Stoll and confirm with OK.

 

 

The color for the binding thread has to be the leading in the color sequence. Change the color sequence if required.

 

    5
    Activate the Stitch length checkbox. Thereby the stitch length available in the Jacquard module will be applied to the pattern.
    6
    Close the dialog box with OK.
  1. Modules were replaced by Devoré knit Twill Jacquard modules.

 

The Devoré knit Köper Jacquard module causes the pattern to be processed on the rear needle bed only. The front knitting systems can execute all the standard functions.

Expand the pattern and start the technical processing:

    1
    Expand the pattern with icon of the Steps of Processing toolbar.
    2
    Carry out the settings in the System functions tab of the MC-Attribute dialog box.
    3
    Execute the Start technical processing function.
  2. In the motif thread area with float the binding thread is knitted as twill.
    For the twill area this means a stitch ratio of 1:2 to the neighboring area.