Plush

Please find the Plush Jacquard-module here:

Jacquard

 

Stoll

 

Devoré knit/Plush

 

 

3-color

 

 

 

Plush

Create the plush pattern and insert the jacquard:

    1
    Draw the devoré-plush design with three different yarn colors or yarn carrier colors.

 

 

    2
    Call up the Jacquards dialog box via the Edit / Generate or Edit Jacquard... menu.
    3
    Create a row selection of the motif height.
    4
    Select the jacquard type Plush under the section Jacquard / Stoll and confirm with OK.

 

The color for the binding thread has to be the leading in the color sequence. Change the color sequence if required.

 

 

    5
    Activate the Stitch length checkbox. Thereby the stitch length available in the Jacquard module will be applied to the pattern.
    6
    Close the dialog box with OK.
  1. Modules were replaced by Plush Jacquard modules.

 

The Plüsch Jacquard module causes the pattern to be processed on the rear needle bed only. The front knitting systems can execute all the standard functions.

Expand the pattern and start the technical processing:

    1
    Expand the pattern with the button of the Steps of Processing toolbar.
    2
    Carry out the settings in the System functions tab of the MC-Attribute dialog box.
    3
    Execute the Start technical processing function.
  2. Pick-up with the plush motif thread in two rows und delayed cast-off
  3. Binding thread is knitted with all needles
  4. Delayed cast-off of the plush loop only possible after pick-up in one row (using the third color with R the picked-up loop will not be knitted again)

 

In a Jacquard module with relief, a R will be displayed within the color which forms the relief (the last color of the table).