Devoré knit + Plush 2-Row

Please find the Devoré knit+Plush 2-Row Jacquard-module here:

Jacquard

 

Stoll

 

Devoré knit/Plush

 

 

3-color

 

 

 

Devoré knit+Plush 2-Row

Create the devoré-plush pattern and insert the jacquard:

    1
    Draw the devoré-plush design with three different yarn colors or yarn carrier colors.

The overall height of the steppings in the motif must be an even number Thus the cast-off will be inserted in every second row.

 

 

    2
    Call up the Jacquards dialog box via the Edit / Generate or Edit Jacquard... menu.
    3
    Create a row selection of the motif height.
    4
    Select the jacquard type Devoré knit+Plush 2-Row under the section Jacquard / Stoll and confirm with OK.

 

The color for the binding thread has to be the leading in the color sequence. Change the color sequence if required.

 

 

    5
    Activate the Stitch length checkbox. Thereby the stitch length available in the Jacquard module will be applied to the pattern.
    6
    Close the dialog box with OK.
  1. Modules were replaced by Devoré knit+Plush 2-Row Jacquard modules.

 

The Devoré knit+Plüsch 2-reihig Jacquard module causes the pattern to be processed on the rear needle bed only. The front knitting systems can execute all the standard functions.

Expand the pattern and start the technical processing:

    1
    Expand the pattern with the button of the Steps of Processing toolbar.
    2
    Carry out the settings in the System functions tab of the MC-Attribute dialog box.
    3
    Execute the Start technical processing function.
  2. Pick-up with the plush motif thread in each row and delayed cast-off after every second row
  3. Binding thread is knitted with all needles