Devoré knit Twill + Plush 1-Row

Please find the Devoré knit Twill + Plush 1-Row Jacquard module here:

Jacquard

 

Stoll

 

Devoré knit/Plush

 

 

3-color

 

 

 

Devoré knit Twill + Plush 1-Row

Create the devoré-plush pattern and insert the jacquard:

    1
    Draw the devoré-plush design with three different yarn colors or yarn carrier colors.

 

    2
    Call up the Jacquards dialog box via the Edit / Generate or Edit Jacquard... menu.
    3
    Create a row selection of the motif height.
    4
    Select the jacquard type Devoré knit Twill + Plush 1-Row under the section Jacquard / Stoll and confirm with OK.

 

The color for the binding thread has to be the leading in the color sequence. Change the color sequence if required.

 

 

    5
    Activate the Stitch length checkbox. Thereby the stitch length available in the Jacquard module will be applied to the pattern.
    6
    Close the dialog box with OK.
  1. Modules were replaced by Devoré knit Twill + Plush 1-Row Jacquard modules.

 

The Devoré knit Köper + Plüsch 1-reihig Jacquard module causes the pattern to be processed on the rear needle bed only. The front knitting systems can execute all the standard functions.

Expand the pattern and start the technical processing:

    1
    Expand the pattern with the button of the Steps of Processing toolbar.
    2
    Carry out the settings in the System functions tab of the MC-Attribute dialog box.
    3
    Execute the Start technical processing function.
  2. Pick-up with the plush motif thread in every second row with delayed cast-off
  3. Binding thread is knitted depending on the twill selection or with all needles