Cut out the shape and complete the pattern

I. Stamp out the shape (=cut out):

You can make pattern related settings in the Configuration k&w dialog box before cutting out.

    1
    Stamp out the shape with .
  1. The Insert/Replace k&w Start dialog box appears.
    2
    Select the desired start.
    3
    Confirm the settings with OK.
  1. The module will be inserted into the pattern.

II. Modify the yarn carrier home position:

    1
    Modify the yarn carrier home position in the Shaped Pattern state of pattern.
    2
    Call up the Yarn Field Allocation dialog box with .
    3
    Position the yarn carrier for the Elastic Yarn1 on yarn carrier track 2 in order to avoid collision with the yarn carrier for the Draw Thread1.
    4
    Close the Yarn Field Allocation dialog box with OK.

III. Complete the pattern:

    1
    Expand the pattern with of the Steps of Processing toolbar.
  1. The Correction of Widening dialog box appears.
    2
    Confirm with Yes.
  1. The shape edges with the Widening attribute are corrected.
    The bind-off module for the collar is inserted.
    3
    Start the technical processing with .
  1. The query Generate MC Program appears.
    4
    Confirm the query with OK.
    5
    Call-up Sintral Check via MC program / Conduct Sintral Check... menu.