Form korrigieren: Hose

I. Correct goring and start in body:

    1
    The gore width can be changed.
    To do this, select and delete columns.

Column selection for width correction

After width correction

    2
    The inserted start in the middle must be changed in the knitting cycle.
    To do this, select columns.
    3
    Change the knitting cycle as shown below.

before

after

    4
    Use a separate stitch tension for the net start in the gore.
    5
    Insert the binding-off module via k&w shape / Insert Binding-Off menu into the pattern.
    - or -
    Call up the Automatic Technical Editing and let it insert the binding-off modules automatically.

Insert the binding-off modules before the automatical technical processing for a better overview.

You can undo the editing steps via the k&w / Load Pattern Before Cutting Out menu.

    6
    Make changes in the Yarn field view.
    7
    Insert a cycle for length control at the tip in the waistband.

II. Complete the Pattern:

    1
    Automatical or stepwise technical processing.
    2
    Generate the Sintral.
    3
    Conduct Sintral Check.