Cut out the shape and complete the pattern

I. Stamp out the shape:

You can make pattern related settings in the Configuration k&w dialog box before cutting out.

    1
    Stamp out the shape with .
  1. The Insert/Replace k&w Start dialog box appears.
    2
    Select the desired start k&w_2x2.
    3
    Confirm the settings with OK.
  1. The module will be inserted into the pattern.
    4
    Expand the pattern with of the Steps of Processing toolbar.
  1. The Correction of Widening dialog box appears.
    5
    Confirm with Yes.
  1. The shape edges with the Widening attribute are corrected.
    The bind-off modules are inserted.

II. Modify the binding-off of the outer edges of the collar and the body:

Watch out the carriage direction of both the bind-off modules.

  1. The pattern is expanded.
    1
    Put the cursor on the start element of the stepping module.
    2
    Call up the context menu with RMB.
    3
    Call up Edit module.
  1. The local module of the Module Explorer of Pattern gets open.
    4
    Modify the knitting procedure.
    5
    Close the dialog box with .
  1. Module will be saved to the Module Explorer of Pattern.
    6
    Proceede the same way with the elements REP and END.

III. Complete the pattern:

    1
    Start the technical processing with .
  1. The query Generate MC Program appears.
    2
    Confirm the query with OK.
    3
    Conduct Sintral Check.