Position and cut-out the shape and expand the pattern

I. Position shape and draw-in float jacquards:

  1. The shape with k&w Arrangements is located on the pattern after the ShapeSizer is closed.
    1
    Position the shape elements Sleeve and / or Body with collar on the motif with the symbol selected and the left mouse button pressed.
    -  or  -
    Select the desired shape element with the selected symbol and position the selected shape element with the arrow keys of the keyboard or of the Tool Properties toolbar.

For drawing-in the motif, place the white help line (position of sleeve-body connection) of the different elements (sleeves and body) at the same height.

    2
    Open via Pattern Parameters / Configuration... menu.
  1. The dialog box appears.
    3
    Select the Knitting Zones k&w tab
    4
    Activate the Cut folded in option.
    5
    Confirm with OK.
    6
    Draw in motif for float jacquard in basic pattern.

Presentation Cut folded in:

Possible settings for drawing:

Ensure a continuous motif when drawing:

    7
    Select the desired Pattern Presentations k&w:
    8
    Run the function Mirror k&w Design to Knitting Layer L1... in the Edit menu.
    9
    Make the desired settings in the dialog box.
    10
    Press the Apply key.
  1. The pattern is applied to the back.

II. Insert Jacquard generator and cut-out shape:

You can make pattern related settings in the k&w configuration dialog box before cutting out.

    1
    Select the jacquard area
    2
    Call up the Jacquards jacquard dialog box in the Edit / Generate or Edit Jacquard... menu.
    3
    Select the setting front in the dialog box under Knitting layer.
  1. The Jacquard generator will be inserted only for the front layer L0.
    4
    Select Float L0 under Jacquard / k&w / Float.
    5
    Press the Apply key.
  1. The Jacquard generator will be inserted in the front layer.
    6
    Select the same jacquard area again.
    7
    Select the setting back in the dialog box under Knitting layer.
  1. The Jacquard generator will be inserted only for the front layer L1.
    8
    Select Float L1 under Jacquard / k&w / Float.
    9
    Press the Apply key.
  1. The Jacquard generator will be inserted in the back layer.

Carry out this cycle in all the other jacquard areas.

    10
    Cut out the shape with in the Steps of Processing toolbar.
  1. The k&w Options for Cut out dialog box appears.
    11
    Confirm the settings in the dialog box with OK.
  1. The Insert/Replace k&w Start dialog box appears.
    12
    Select the desired start.
    13
    Confirm with OK.

III. Expand the pattern:

    1
    Expand the pattern with of the Steps of Processing toolbar.
  1. The Correction of Widening dialog box appears.
    2
    Confirm with Yes.
  1. The shape edges with the Widening attribute are corrected.
    The bind-off module for the collar is inserted.