Shapewizard: Determine docking points and k&w Arrangements
I. Open ShapeWizard and set docking points:
- 1
- Open the ShapeWizard dialog box via the / menu.
- 2
- Open the Docking Points dialog box with the
icon in the toolbar of the Shapewizard. 
- 3
- Set the docking points for sleeve-body.
If the Ctrl key is pressed while specifying the docking points, then the cursor automatically jumps to the nearest edge start or edge end.
- 4
- Set remaining narrowing docking point:
- The Remaining narrowing connects the stitches remaining at the end of the sleeve to the body.
If the remaining narrowing docking point is specified, then the Suspend sleeve docking point will be calculated automatically.
- 5
- Set the number of stitches and rows for the remaining narrowing in the ShapeWizard dialog box.
- 6
- Set the docking point Collar.
- Always set the connecting line on the left collar side.
- The same position is automatically applied for the right side.
- Overwrite the position for the right side in the Docking points dialog box if you whish the collar to be positioned asymmetrically.
Result:
The width of the collor element is adjusted by the docking point.
II. Determine k&w Arrangements:
- 1
- Press Determine k&w Arrangements.
You can delete the determined k&w Arrangements with the Initialize button.
- 2
- Exchange k&w Arrangements:
Select the k&w Arrangement in the ShapeWizard dialog box by double click.
- A window with alternative k&w Arrangements appears.
- 3
- Select the desired k&w Arrangement.
- 4
- Close the dialog box with the OK button.
- The selected k&w Arrangement is inserted.
The elements of the shape (front, back, sleeve and collar) and the kaw file must all be located in the same directory.
- 5
- Close the Shapewizard dialog box.