Shapewizard: Determine docking points and k&w Arrangements

I. Open ShapeWizard and set docking points:

    1
    Open the ShapeWizard dialog box via the Shape / ShapeWizard (k&w Put Together Shape)... menu.
    2
    Open the Docking Points dialog box with the icon in the toolbar of the Shapewizard.
    3
    Set the docking point for sleeve-body.

If the Ctrl key is pressed while specifying the docking points, then the cursor automatically jumps to the nearest edge start or edge end.

    1
    Set remaining narrowing docking point:
  1. The Remaining narrowing connects the stitches remaining at the end of the sleeve to the body.

If the remaining narrowing docking point is specified, then the Suspend sleeve docking point will automatically be calculated based on the row ratio between body and sleeve.

II. Determine k&w Arrangements:

  1. The docking points for Sleeve-Body and for Remaining narrowing in the Docking points dialog box have to be defined.
    1
    Press Determine k&w Arrangements.

:

    2
    Exchange k&w Arrangements:
    Select the k&w Arrangement in the ShapeWizard dialog box by double click.
  1. A window with alternative k&w Arrangements appears.
    3
    Select the desired k&w Arrangement.
    4
    Close the dialog box with the OK button.
  1. The selected k&w Arrangement is inserted.
    5
    Close the Shapewizard dialog box.