Draw-in the k&w Arrangement manually: Saddle shoulder with V-neck

I. Insert manually k&w Arrangements in the Shape View:

    1
    Open the Shape view with the button.
    2
    Select the key.
    3
    Position the shape elements relative to one another with the left mouse button.
  1. The k&w Arrangement sleeve body connection can be inserted.
    4
    Open the Module Explorer via the Module / Module Explorer of Database... menu.
    5
    Select and insert the desired k&w Arrangement.
    6
    Sleeve-body connection:
    7
    Insert the k&w Arrangement once in the Shape view at the position of the sleeve body connection.
    8
    Move the length compensation:
    Move the length compensation between body and sleeve with the k&w Arrangement from the lower fabric edge to the center of the fabric.
    9
    Use the following k&w Arrangements for the length compensation:
    10
    Fill up uniformly the length difference between body and sleeve with k&w Arrangements.
  1. The area with k&w Arrangement X Standard will now be overwritten with the above described k&w Arrangements.
    11
    Insert the k&w Arrangement after the sleeve-body connection up to the start of the V-neck:
    12
    Insert the k&w Arrangement subsequently from the V-neck start up to the start of the saddle:
    13
    Enter the k&w Arrangement from the start up to the end of the saddle.

k&w Arrangement

Name

Function

C68-3 areas 3:1:3 with opening (L0)

Knitting of the saddle shoulder in the 3:1:1 ratio between sleeve and body in the area of the V-neck.

    14
    End of the saddle shoulder
    Insert the following k&w Arrangement in the area between the saddle shoulder and the collar start:
    15
    Collar
    Insert the following k&w Arrangement:

Knitting cycle modules

Name

Function

D12-collar with opening (L0)

Knitting of the collar with opening in front layer.

    16
    Binding-off collar.
    Insert the following k&w Arrangement for the collar on the last knitting row:

Knitting cycle modules

Name

Function

D10-neckline front open bind off

Binding-off the collar element with opening in the front layer.

    17
    Save the shape as shk via the Shape / Save Shape As... menu.
    18
    Close the Shape View.