Draw basic pattern and define plating colors
I. Draw motif and define plating colors
- 1
- In the basic pattern draw-in the desired motif with further yarn colors:
- Exchange yarn color #31 to yarn color #1
- Yarn color #2 for the area of Stoll-Ikat-plating
- Yarn color #3 and #4 for the area of inverse plating
|
| |
1 | 1x1 Start |
2 | Area of Stoll-Ikat-plating® |
3 | Area of inverse plating |
- 2
- Open the Plating dialog box with
.
The in the Configuration / Further Setting dialog box are used to create new plating colors.
The i marking will automatically be applied to the new colors by selecting 
Stoll-ikat plating®.
- 3
- Create the following plating colors:
- 2 plating colors for the area of Stoll-ikat plating® with the i marking.
- 2 plating colors for the area of inverse plating without marking
- 1 plating color for the start without marking
|
No. | Plating Colors | Use |
|---|---|---|
1 | P1 (orange) | Combination plating colors for the area of Stoll-ikat plating®
|
P2 (blue) | ||
2 | P3 (light blue) | Combination of plating colors for the area of inverse plating |
P4 (yellow) | ||
3 | P5 (grey) | Plating color for the start |
: When creating the plating colors for Stoll-ikat plating ® you have to allocate type (i) to the plating color.
- 4
- Right click on the corresponding plating color.
- 5
- Select the item of the context menu.
- The plating color is indicated by the i symbol.
All plating colors will get the i marking if Stoll-ikat plating® is activated in / / Further Settings tab.
Meaning, that you have to cancel the marking of the colors for inverse plating.
- 6
- Right click the corresponding yarn color of a plating color combination.
- 7
- Select the desired YPI index from the table and allocate it.
|
No. | YPI Index |
|
|---|---|---|
1 | YPI 1 + YPI 2 |
|
2 | YPI 3 + YPI 4 | |
3 | YPI 5 + YPI 6 |
- 8
- Exchange the yarn colors in the basic pattern with the corresponding plating colors via the
drawing tool
|
| |
1 | Plating color P5 |
2 | Plating color P1 + P2 |
3 | Plating color P3 + P4 |
Stoll-ikat plating ®
Per il cosiddetto Stoll-ikat plating ® si richiedono, per ogni cambio di colore in un sistema, due colori vanisé (= una combinazione di colori vanisé) per rango di disegno.
Con Stoll-ikat plating ® è possibile ricorrere in ogni sistema a un'altra combinazione di colori vanisé.
In un rango di disegno sono consentiti max. 30 cambi di posizione, nel qual caso occorre comunque osservare una distanza tra i cambi di colore di 2 pollici (per 1.0 m/s).