Draw-in the k&w Arrangements manually: Inserted sleeve with V-neck

Insert k&w Arrangements in the Shape View manually:

    1
    Open the Shape view with the button.
    2
    Select the key.
    3
    Position the shape elements relative to one another with the left mouse button.
  1. The k&w Arrangement sleeve body connection can be inserted.
    4
    Open the Module Explorer via the Module / Module Explorer of Database... menu.
    5
    Select and insert the desired k&w Arrangement.
    6
    Sleeve-body connection:
    7
    Insert the k&w Arrangement once in the Shape view at the position of the sleeve body connection.
    8
    Move the length compensation:
    Move the length compensation between body and sleeve with the following k&w Arrangement from the lower fabric edge to the center of the fabric.
    9
    Use the following k&w Arrangements for the length compensation:
    10
    Fill up uniformly the length difference between body and sleeve with k&w Arrangements.
  1. The area with k&w Arrangement X Standard will now be overwritten with the above described k&w Arrangements.

You can select the inserted knitting cycle modules and copy and paste them with Ctrl + C and Ctrl + V.

    11
    Insert remaining narrowing:
    Insert a k&w Arrangement for the remaining narrowing of the sleeve from the top to the bottom:

Designation

Presentation

Function

k&w Arrangement

C51- 3 Areas with opening (L0) 0:2:0-3Y

The k&w Arrangement connects the 3 areas (sleeve-body-sleeve) by knitting 2 rows in the body and narrowing without knitting the sleeves to the body.

with opening (V-neck)

Shape view without k&w Arrangement

1

Sleeve

2

Body

3

Height of the remaining narrowing

4

Height of the body
= 2 x height of the remaining narrowing

Shape view with
k&w Arrangement

1

Sleeve

2

Body

4

Height of the k&w Arrangement in stitch ratio 0:2:0

    12
    Insert the k&w Arrangement below the remaining narrowing up to the start of the V-neck:
    13
    Insert the k&w Arrangement between the start of the V-neck and the sleeve-body connection:
    14
    Insert shoulder gore.
    Insert the following k&w Arrangement in the area of the shoulder:

Knitting cycle modules

Name

Function

C39 Shoulder gore with opening (L0)
+ binding-off the shoulder
+ neck binding-off 1Y

Knitting of the shoulder area
(with one yarn carrier) in goring technique and following binding-off of the shoulder and of the neck.

 

or

C69 Shoulder gore with opening (L0)
+ binding-off the shoulder
+ neck binding-off-3Y

Knitting of the shoulder area
(with three yarn carriers) in goring technique and following binding-off of the shoulder and of the neck.

    15
    Save the shape as shk via the Shape / Save Shape As... menu.

If you do not save the shape view with the k&w Arrangements, it is not possible to remove the shape from the pattern.
Afterwards you would have to re-insert the k&w Arrangements into the shape view.

    16
    Close the Shape View.