What was new in CREATE PLUS V2.7

Enhanced settings of the line properties.

Stepping Kind Definido por el usuario

User defined lines are exclusively defined by the sub-rows of the Tabla de líneas.
With selecting the Definido por el usuario stepping kind, no Escalonamiento and no Función will be offered in the Propiedades de línea.

• User defined lines are marked with M in the view of the lined shape.
• In the view of the lined shape, you cannot change a user defined line, as it is exclusively defined by the sub-rows of the Tabla de líneas.
  If a start or end point of a user defined line is moved, the whole line will get moved the same way.
• Line Properties

New variants of Fair Isle within the lined shape.

Four variants of the Secuencia de escalonamientos Fair Isle are available within the lined shape.

The variants are offered in the Propiedades de línea for selection.

• Estándar
• Knitting technique as before with the Fair Isle selection.
• Trapecio
• In the Lined Shape:



• Folded-out in the Raster-Shape:



• Diente de sierra
• In the Lined Shape:



• Folded-out in the Raster-Shape:



• Pliegue
• In the Lined Shape:

Each variant has specific options.

The Trapecio and Diente de sierra variants can be displayed by the Raster-Shape folded out or folded in.
Fold In/Out button below of the cursor attributes

• Multi-step Narrowing

Each lined shape has its own line table.

Each lined shape has its own Tabla de líneas docked to the document window.

• The Tabla de líneas is pinned to the right edge by default.
  You can drag it to any desired edge of the document window.
• You can expand the Tabla de líneas and unpin it from the edge.
• The table always remains related to the same shape.
• You can dock the Tabla de líneas again to the corresponding lined shape by the Acoplar function in the context menu of the title bar.
• You can hide a docked Tabla de líneas via the pin in the title bar.
• You can open and edit several line tables of different shapes at the time.
• You can copy areas of a Tabla de líneas and paste them into another Tabla de líneas.
• Calling up the Tabla de líneas is no longer possible in the Inicio ribbon or the context menu of the lined shape layer.
• Line Table

Adjustable view on the lines of the right and the left shape halves

You can move the areas of the shape lines of the left or right shape half in the Tabla de líneas.

Therefore, drag the separator between the areas as desired to the top or bottom.

Raster-Shape Preview of a Lined Shape

You can get the rasterized view for each lined shape of the Cortes tool window via the context menu.

• Rasterized view appears folded-out.
• Especially helpful for the Trapecio and Diente de sierra variants of Fair Isle.
• The rasterized view cannot be edited.



• Context menu on the shape

Modified behavior of starts with positioned shapes (≤ V2.6 vs. V2.7)

• Behavior when positioning a shape without start on a pattern with start:
• The start of the pattern gets allocated to the shape.
• If the shape is moved on the pattern, the start will be moved accordingly.
• With the positioned shape, the start can only be modified by the start module and not within the pattern.
• If the shape is withdrawn from the pattern, the start returns to its original position within the pattern.
• Behavior when loading or importing a pattern of a former version (≤ V2.6):
• The pattern of the former version has a positioned shape.
• The start of this pattern has been modified within the pattern having the positioned shape.
  Therefore, the start within the pattern is different from the start module.
• When loading or importing this pattern in version V2.7, the pattern will be converted to a raster-shape.
  With it, the modified start will be kept in the pattern.

Fully Fashion – Shape Data Print

Improved Print Function for Lined Shapes and Dimensioned Shapes

• In the Editor of Lined or Dimensioned Shapes:
  Archivo ribbon / Reporte de los datos del corte.
• Shape Data Report (view)

The individual topic:

• All shape elements will appear in the preview
• The shape lines of asymmetric shapes appear next to another for the left and right halves of shape.
  
• Layouts for asymmetric shapes:
  

Configuration Template in Máquinas propias Dialog Box

• New functions for the Plantilla de configuración in the context menu on the entries under Máquinas propias:

• You can freely define the storage location of the Plantilla de configuración.
• A Plantilla de configuración is basically machine specific.
• However, you can allocate a Plantilla de configuración to a different type of machine.
• With it, only the relevant data will be applied.
• Configuration Template
• Select Machine

Loading templates in the New Pattern Project dialog box

• Open the file explorer via the … button and select the template.
• The last selected template is offered in the Nuevo proyecto de muestra dialog box.
• If you have selected your own machine (My Machines) with an already allocated Plantilla de configuración, this will be applied directly.
• The Plantilla para datos Setup is only loaded via the Nuevo proyecto de muestra dialog box.
• The Plantilla para datos Setup setting has been removed from the Opciones dialog box.
• Nuevo proyecto de muestra (diálogo)

Create a new function in the Setup Data Template and assign it.

• Sintral Tab

Multiple Selection of yarn carriers in the Guiahilos tool window

You can select several yarn carriers at the same time in the tool window Guiahilos.

With it, the available options are reduced as follows:

• Tipo de guiahilos
• Fijación del borde

The same behavior arises in the following situations:

• If you selected a color area within the Parámetros de color table or the Vista de guiahilos to which several yarn carriers are allocated.
  E.g. with plating or multi-system knitting.
• If you have selected several color areas having different yarn carriers.
• Available Yarns and Yarn Carriers Tab

Excluir guiahilos del pinzado (YG:n!;)

• With the check box enabled, the yarn carrier will not be clamped but moved to its position at the SEN edge.
  Only with ADF machines.
• Settings for Yarn Carriers

Color Parameter Table

Extra position for the column of row quantity

The column for quantity of rows no longer only refers to knitting-out.
The entry define the distance of color fields from which on you want to knit-out, to move to SEN edge or to clamp.

Therefore, the column is no longer part of the knitting-out group but placed at the left in the general area.

Row-offset for Knitting-in by Technical Rows

You can enter the Row-offset for Knitting-in in pattern rows as well as in technical rows.

• Color Parameters

The Sectores de tisaje (SEN) and Tándem (YLR) sectors have been reworked.

Sector Sectores de tisaje (SEN) of the Guiahilos tool window

• Datos de la Configuración are removed from the upper area.
• The SEN areas are shown in the middle and more clearly.

Sector Tándem (YLR) of the Guiahilos tool window

• The yarn carrier allocation of both carriages is shown.
• In this view, you can shift the yarn carrier tracks of the right carriage only.

• Knitting Areas (SEN) Tab
• Tandem (YLR) Tab

Detecting opened knitting elements, shapes and patterns

Opened knitting elements, shapes and patterns are marked by OPEN label in the tool window.

• Opened
  Label with gray background
  
• Opened and active
  Label with blue background
  

Marking of modified STOLL machines

If you select a STOLL machine in the Nuevo proyecto de muestradialog box, then you can make settings for this machine at the same time.

• Then, the settings of this machine no longer correspond with the STOLL default.
• An orange button appears next to the machine label representing the deviation from the STOLL default.
• You recall the modifications by click on the orange button.
  Then, the settings of this machine correspond with the STOLL default again.

New function Dibujar con selección

• In the Inicio ribbon / Modificar ribbon group
• In the Selección ribbon

With Dibujar con selección, the drawing area is at once selected when drawing.

• The selection is added when drawing additively.
  With CTRL
• The selection is canceled when drawing subtractively.
  With CTRL + ALT
• Modify (Ribbon Group)

Groups and orders in the Multiple Processing dialog box

The setting of the Muestra tool window is taken into account by the Procesamiento múltiple dialog box.

The working with groups and orders is applied the same way.

• Multiple Processing (group)

Standalone editor for Sintral functions in the Setup Data

You will find these sections in the Sintral tab of the Parámetros de muestra.

• Llamada de función (F:)
• Instrucción Sintral / PRINT
• Función Sintral

You can edit functions and Sintral commands in the standalone Sintral Editor much easier, faster and clearer.

Assigning Sintral Functions by the Setup Data

Now, you can assign the Sintral functions for Antes START and Desprender pieza de tisaje also within the Setup Data.

This selection is no more available via Configuration / Sintral.
There you will find the link to the Sintral functions of the Setup Data.

The selection for the project will be saved with the Setup Data Template.

• Function call
• Sintral Instruction / PRINT
• Sintral Function

The Descripción column is added to several tool windows.

The Descripción column is available in the Colores de vanisado, Colores de sistemas múltiples, Asignación de hilo and Tabla de líneas table.

Ruler in the Vista del tejido

At the left and upper edge of the Vista del tejido

Define the unit of measure by cm or inch in the Configuración del proyecto tab of the Opciones dialog box for new projects.

• Fabric View

Revision of the Options dialog box.

The tabs of the Opciones dialog box has partly been renamed and updated

The functions within the tabs have been simplified, made more consistent and better organized.

• Options

12th + 13th Gen Intel® Core™ Desktop Processors do not support the Simultaneous Fabric Preview faultlessly.

• Activate the Corregir errores de visualización utilizando los últimos procesadores Intel check box in case of error.
  Archivo ribbon group -> Opciones dialog box -> General tab -> Ajustes gráfica section
• Disable this function again if the presentation gets faulty.

You can manage the colorways more easily in the properties dialog box of a yarn or of a yarn from image.

• You can change the arrangement of colorways by their arrows.
• The arrangement can also be changed via drag and drop on the colorways.
• For a better overview, the dialog can be enlarged as desired.