What was new in CREATE PLUS V2.5

Release V2.5. - 07/2023

Dosya sürümü: 13 (V2.5)

Compatible with:

New markings for setup values that are not modified by the technical processing.

Pattern Parameters -> Section Kumaş çekimi -> Tab Ana merdane (WMF)

If the data of the WM min , WM maks , N min or N maks columns is changed manually, the marking appears beside the entry. It appears exclusively in these columns.

The marking means that the entry cannot be modified by the technical processing.

Filtered view in the tool windows Module, CA and MA

A filtered view can be selected using the context menu on the knitting elements in the Modüller, CA and MA tool windows.

The knitting elements can be filtered by pattern or group.
The groups correspond to the generated groups in the Desen tool window.

The options (pattern or groups) appear with the activation of a filter above the content view in the tool window.

By clicking on a pattern or a group only the knitting elements that are applied in the pattern or group will be displayed in the content view.

Options when exporting the design view

Resim dosyası olarak dışa aktar... context menu on the design view of a pattern

There are 3 options for the export of the design view as an image file:

  • With or without grid
  • With or without contour
  • Selection or entire pattern

Grid settings

The grid settings when exporting the image file are applied from the settings of the status bar.

In the dialog box Options of the status bar you define the following settings for the grid in the pattern:

  • Display or hide grid
  • Select the grid colors of the main and help lines
  • Define the distance and offset of the lines

The image file is exported with these grid settings.

  • Export image without grid.
    A stitch in the pattern corresponds to one pixel in the image:
  • Export image with grid.
    A stitch in the pattern corresponds to four pixels in the image:
    (One pixel applies to the frame)
  • Options (tool window)

With or without contour / Selection or entire pattern

In the dialog box Save As appear the following options for the export of the file:

  • ana hat ile
    If a shape is positioned on the pattern then the selection of exporting the pattern with or without shape contour appears.
  • Yalnızca seçimi kaydet
    If there is an area selected in the pattern then the selection of saving the entire pattern or only the selection appears.

Symbols for Knitting Elements are no longer in Group tool window

The symbols for knitting elements are specific and dependent on the knitting element to be edited. That is why they are only offered in the document window of the corresponding knitting element as a tab.

The symbols for knitting elements can no longer be opened as a tool window in the Başlat ribbon -> Araç penceresi group.

Enter your own path

A private path can be selected in the Değiştir / Karşılıklı Değiştir area with İğne verileri -> Yapı modülleri.

In the drop-down menu scroll all the way down and click on the Örme elemanını başka yol altında seç... option.

The following dialog box appears:

In it select the path and the desired module.

Area Liste prosesi

You can toggle the area forListe prosesi of the Bul ve değiştir dialog box.

For this click on the right border on the symbol.

  • You can apply operations of the Bul ve değiştir dialog box to the Liste prosesi area.
  • The operations of the list will be done by this sequence.
  • You can switch the sequence of the first column by changing the numbering.
  • You can disable items of the list by the second column. They will be ignored by the list processing then.
  • You can save the lists and load them independently from the pattern.
    STOLL Bul ve değiştir (*.srxf)
  • List Processing

Mix Colors Function in the Vanize renkleri Tool Window

The Mix Colors column (1) is available in the Vanize renkleri tool window.


  • The plating color (2) is automatically mixed from the selected colors.

  • Entering the color value manually disables the check box.

New Features of CA

In a reference row in the CA there are two options to define empty needle actions:


  • Örme elemanı için iğne hareketini / simgeyi sil

  • Transparan

In a column with defined overwriting excess width, the Örme elemanı için iğne hareketini / simgeyi sil selection results in the corresponding area in the adjacent segment being deleted because of this empty needle action. (See 1 in the image)

If the Transparan selection is drawn in, then the area in the adjacent segment is not deleted. (See 2 in the image)

Duplicate and Mirror Shape Element

In the context menu of a shape element there is the Yansıtarak çoğalt function.

This function is available within the lined shape project as well as within the lined shape layer of a pattern project.

With this function shape elements in a lined shape are able to rapidly be duplicated mirrored.

  • Mirrored basic shape
    • The shape element is mirrored and is inserted in the mirrored position in the basic shape.
    • The anchor point of the shape element is also mirrored at the same time.
  • Non-mirrored basic shape
    • The mirrored shape element is inserted beside the original shape element.
    • Position and anchor point of the shape element cannot be mirrored.

Shape element Tiktak / Asimetrik

An asymmetrical shape element gore widening to the left is inserted on the left side of the basic shape and widening to the right on the right side.
Both are symmetrical in their shape

New function Go to Selection

In the Seçim ribbon there is a new feature.

Seçime git
If there is an area selected in the pattern then it is displayed centered in the document window.

This function can also be carried out with the help of the shortcut CTRL-B.

Seçim in the context menu on the pattern

You can call up all functions of the Seçim ribbon in the context menu of the Design View except Ekle... and Kaldır... .

 

New Function in the Desen Tool Window

Beside the pattern entries in the Desen tool window are the different symbols as display and button.
A new symbol was added at the end.

A dialog box is opened using this symbol that displays all knitting elements of the pattern.
In the header ribbon of the dialog box there are additionally the same functions as in the pattern entry.

The knitting elements are opened with double clicking.

To close the window again, click on the cross in the top right.

The knitting elements applied in the pattern are displayed in the Desen özellikleri dialog box .

The knitting elements are opened with double clicking.

The presentation of the knitting elements in the tool windows was modified.

  • Around the thumbnail of the knitting element there is a frame.
  • In the upper part of the thumbnail you can find different markings that identify the following properties of the knitting element.
    • Identifying Color
    • Knitting element is applied in the pattern
    • Knitting technique MG
    • Knitting element with repetitions

  • The mark appears at the lower right if the module was created by STOLL.
    A module of your own will not have this mark.
  • In the Tool Window module the background color beside the thumbnail has the following meaning.
    • If the knitting element is at the cursor, then the background is light blue
    • If the knitting element is selected, then the background is blue
    • If the knitting element is selected and is at the cursor, then the background is half blue and the other half is light blue.

Panning the View by Mouse and SPACE Key

The behavior to the move of the view was improved in the document window.

  • If you move the view with the mouse and spacebar, then the direction and speed of the movement is modified depending on the position of the mouse.
    • If the mouse is in the centre of the document window, then the view remains the same.
    • If the mouse is outside of the centre, then the view moves in the corresponding direction as long as you press the spacebar.
    • The further you move the mouse with pressed spacebar outwards, the faster the view moves in this direction.

MC-Setup Editor is renewed

The MC-Setup Editor was newly developed.

Call it up by:

  • Başlat tab -> Sintral group -> MC-Setup'ı göster
  • As standalone app SetupEditor.exe

The layout of the tabs corresponds to the layout of the setup data in the pattern.

The help for the dialog boxes and menu bars can be called up using the F1 button.

Menu bars:

    228
    With an active window, in the menu bars place the cursor on a group and press the F1 button.
    The cursor has to be in the menu bar on an empty area without button.
  1. The help to the corresponding group appears.

Correct positioning of the cursor:

Incorrect positioning of the cursor:

Dialog boxes and tool windows

    229
    Open the dialog box or the tool window.
    230
    Position the cursor on the dialog box or the tool window and press the F1 button.
  1. The help to the corresponding dialog box or tool window appears.

Background Image Adopted to Stitch Density of Dimensioned Shape

You can load a background image with Arka plan resmini örme paneli yükle... of the context menu.

The image can be loaded specifically for a fabric piece or independently from the existing shapes.

  • If the image is loaded for a fabric piece, then it will be inserted corresponding to the stitch density defined in the shape.
  • If the image is loaded independently from an existing shape, then the Resim al dialog box appears.
    You can load the image with or without stitch density.
    • With stitch density:

      The selected entry from the Stitch Density tool window appears in the tooltip in the top right of the image.
    • Without stitch density:

      The image can then be pulled into the desired size using the graspers.

You can find the news of the previous releases in the CREATE Yardım (F1) help.