System Functions

Rétablir les valeurs par défaut

Resets the settings to the default values.

Fonctions système

Make settings per system, carriage direction and needle bed for the following selection:

Cueillage

Cueillage non abattu

Maille

Prendre bouche-trou

Abattre

Reporter de la fonture

Came de chute séparée

Entraîner le guide-fil de trame

With machines with additional bed appears the selection:
Reporter sur fonture auxiliaire

• Not Sunken Tuck
• Split-stitch technique
• Divided Stitch Cam
• Presser Feet for Weft Yarn and Knitting-in

Tous

Enter settings for all systems
< > in both carriage directions
<< >> separated according to carriage direction

Click on the + to set the presentation to separated according to carriage direction.

Click on the - to set the presentation to in both carriage directions.

S1 – Sx

Settings for the respective system
< > in both carriage directions
<< >> separated according to carriage direction

Peluche

Activate the check box, when the plush technique is to be used to knit.

• Knitting Technique: Plush

Système peluche

Shows the systems that can work with plush.

Conversion de la chute

You have these options for a system conversion depending on the selected machine:

Tenue en bas par fonction cueillage

• Holding-deep by Tuck Function
• A system conversion at the machine is necessary.

The selection Cueillage is disabled for the converted systems.

Dévoré (1 système)

• Devoré Knitting Technique
• For ADF machines only and only for the rear needle bed
• System conversion at the machine is necessary.
• Further settings are necessary in the System Function control column.
• The following function appears when selecting Devoré:
• Utiliser une chute avec modification "Dévoré (1 système)" pour un tricotage normal.
• Systems with Devoré conversion are not recommended for knitting and therefore also disabled by default.
• Activate this function if you still want to use the converted system for ordinary knitting.
• Provide a plating color with YPI for the corresponding areas.

Different system functions are disabled automatically for the converted systems.

• Kit Dévoré par un système
• Use Devoré (Overview)

FlexPly

The FlexPly knitting technique essentially corresponds to the Devoré technique executed on both needle beds in the same system.

• FlexPly Knitting Technique
• FlexPly is available for ADF machines of the EKC type and 7.2.
• A system conversion at the machine is necessary for both needle beds in the same system to use FlexPly.
• The FlexPly avant et arrière setting is required in the Fonction système control column.
  System Function
• The following function appears with FlexPly selected:
• Utiliser une chute avec modification "FlexPly" pour un tricotage normal.
• It is not recommended to knit in systems with FlexPly conversion and therefore also disabled by default.
• Activate this function if you still want to use the converted system for ordinary knitting.
• Provide a plating color with YPI for the corresponding areas.

Systems converted for FlexPly cannot drive yarn carriers into clamping position.

Kit Dévoré par un système