What's new in CREATE PLUS?

Enhanced settings of the line properties.

Stepping Kind 用户自定义

User defined lines are exclusively defined by the sub-rows of the 线表.
With selecting the 用户自定义 stepping kind, no 收放针 and no 功能 will be offered in the 线属性.

• User defined lines are marked with M in the view of the lined shape.
• In the view of the lined shape, you cannot change a user defined line, as it is exclusively defined by the sub-rows of the 线表.
  If a start or end point of a user defined line is moved, the whole line will get moved the same way.
• Line Properties

New variants of Fair Isle within the lined shape.

Four variants of the 收放针曲线类型 均匀收针 are available within the lined shape.

The variants are offered in the 线属性 for selection.

• 默认
• Knitting technique as before with the 均匀收针 selection.
• 梯形
• In the Lined Shape:



• Folded-out in the Raster-Shape:



• 锯齿
• In the Lined Shape:



• Folded-out in the Raster-Shape:



• 皱褶
• In the Lined Shape:

Each variant has specific options.

The 梯形 and 锯齿 variants can be displayed by the Raster-Shape folded out or folded in.
Fold In/Out button below of the cursor attributes

• Multi-step Narrowing

Each lined shape has its own line table.

Each lined shape has its own 线表 docked to the document window.

• The 线表 is pinned to the right edge by default.
  You can drag it to any desired edge of the document window.
• You can expand the 线表 and unpin it from the edge.
• The table always remains related to the same shape.
• You can dock the 线表 again to the corresponding lined shape by the 停驻 function in the context menu of the title bar.
• You can hide a docked 线表 via the pin in the title bar.
• You can open and edit several line tables of different shapes at the time.
• You can copy areas of a 线表 and paste them into another 线表.
• Calling up the 线表 is no longer possible in the 起头 ribbon or the context menu of the lined shape layer.
• Line Table

Adjustable view on the lines of the right and the left shape halves

You can move the areas of the shape lines of the left or right shape half in the 线表.

Therefore, drag the separator between the areas as desired to the top or bottom.

Raster-Shape Preview of a Lined Shape

You can get the rasterized view for each lined shape of the 模型 tool window via the context menu.

• Rasterized view appears folded-out.
• Especially helpful for the 梯形 and 锯齿 variants of Fair Isle.
• The rasterized view cannot be edited.



• Context menu on the shape

Modified behavior of starts with positioned shapes (≤ V2.6 vs. V2.7)

• Behavior when positioning a shape without start on a pattern with start:
• The start of the pattern gets allocated to the shape.
• If the shape is moved on the pattern, the start will be moved accordingly.
• With the positioned shape, the start can only be modified by the start module and not within the pattern.
• If the shape is withdrawn from the pattern, the start returns to its original position within the pattern.
• Behavior when loading or importing a pattern of a former version (≤ V2.6):
• The pattern of the former version has a positioned shape.
• The start of this pattern has been modified within the pattern having the positioned shape.
  Therefore, the start within the pattern is different from the start module.
• When loading or importing this pattern in version V2.7, the pattern will be converted to a raster-shape.
  With it, the modified start will be kept in the pattern.

Fully Fashion – Shape Data Print

Improved Print Function for Lined Shapes and Dimensioned Shapes

• 文件 ribbon / 模型数据报告.
• Shape Data Report (view)

The individual topic:

• All shape elements will appear in the preview
• The shape lines of asymmetric shapes appear next to another for the left and right shape halves.
  
• Layouts for asymmetric shapes:
  

Configuration Template in 个人 Dialog Box

• New functions for the 配置模板 in the context menu on the entries under 个人:

• You can freely define the storage location of the 配置模板.
• A 配置模板 is basically machine specific.
• However, you can allocate a 配置模板 to a different type of machine.
• With it, only the relevant data will be applied.
• Configuration Template
• Select Machine

Loading templates in the New Pattern Project dialog box

• Open the file explorer via the … button and select the template.
• The last selected template is offered in the 新花型项目 dialog box.
• If you have selected your own machine (My Machines) with an already allocated 配置模板, this will be applied directly.
• The Setup 数据模板 is only loaded via the 新花型项目 dialog box.
• The Setup 数据模板 setting has been removed from the 选项 dialog box.
• New Pattern Project (dialog box)

Create a new function in the Setup Data Template and assign it.

• Sintral Tab

Multiple Selection of yarn carriers in the 导纱器 tool window

You can select several yarn carriers at the same time in the tool window 导纱器.

With it, the available options are reduced as follows:

• 导纱器类型
• Border Fixation

The same behavior arises in the following situations:

• If you selected a color area within the 颜色参数 table or the 导纱器视图 to which several yarn carriers are allocated.
  E.g. with plating or multi-system knitting.
• If you have selected several color areas having different yarn carriers.
• Available Yarns and Yarn Carriers Tab

Exclude from Clamping (YG:n!;)

• With the check box enabled, the yarn carrier will not be clamped but moved to its position at the SEN edge.
  Only with ADF machines.
• Settings for Yarn Carriers

Color Parameter Table

Extra position for the column of row quantity

The column for quantity of rows no longer only refers to knitting-out.
The entry define the distance of color fields from which on you want to knit-out, to move to SEN edge or to clamp.

Therefore, the column is no longer part of the knitting-out group but placed at the left in the general area.

Row-offset for Knitting-in by Technical Rows

You can enter the Row-offset for Knitting-in in pattern rows as well as in technical rows.

• Color Parameters

The 编织区域 (SEN) and 分机头 (YLR) sectors have been reworked.

Sector 编织区域 (SEN) of the 导纱器 tool window

• 配置文件数据 are removed from the upper area.
• The SEN areas are shown in the middle and more clearly.

Sector 分机头 (YLR) of the 导纱器 tool window

• The yarn carrier allocation of both carriages is shown.
• In this view, you can shift the yarn carrier tracks of the right carriage only.

• Knitting Areas (SEN) Tab
• Tandem (YLR) Tab

Detecting opened knitting elements, shapes and patterns

Opened knitting elements, shapes and patterns are marked by OPEN label in the tool window.

• Opened
  Label with gray background
  
• Opened and active
  Label with blue background
  

Marking of modified STOLL machines

If you select a STOLL machine in the 新花型项目dialog box, then you can make settings for this machine at the same time.

• Then, the settings of this machine no longer correspond with the STOLL default.
• An orange button appears next to the machine label representing the deviation from the STOLL default.
• You recall the modifications by click on the orange button.
  Then, the settings of this machine correspond with the STOLL default again.

New function Draw with Selection

• In the 起头 ribbon / 修改 ribbon group
• In the 选择 ribbon

With Draw with Selection, the drawing area is at once selected when drawing.

• The selection is added when drawing additively.
  With CTRL
• The selection is canceled when drawing subtractively.
  With CTRL + ALT
• Modify (Ribbon Group)

Groups and orders in the Multiple Processing dialog box

The setting of the 花型 tool window is taken into account by the Multiple Processing dialog box.

The working with groups and orders is applied the same way.

• Multiple Processing (group)

Standalone editor for Sintral functions in the Setup Data

You will find these sections in the Sintral tab of the Setup 数据.

• 功能调用 (F:)
• Sintral 指令 / PRINT
• Sintral 功能

You can edit functions and Sintral commands in the standalone Sintral Editor much easier, faster and clearer.

Assigning Sintral Functions by the Setup Data

Now, you can assign the Sintral functions for 在 START 之前 and 脱掉织片 also within the Setup Data.

This selection is no more available via Configuration / Sintral.
There you will find the link to the Sintral functions of the Setup Data.

The selection for the project will be saved with the Setup Data Template.

• Function call
• Sintral Instruction / PRINT
• Sintral Function

The 说明 column is added to several tool windows.

The 说明 column is available in the 添纱颜色, 多系统颜色, 纱线分配 and 线表 table.

Ruler in the 织物视图

At the left and upper edge of the 织物视图

Define the unit of measure by cm or inch in the Project Settings tab of the 选项 dialog box for new projects.

• Fabric View

Revision of the Options dialog box.

The tabs of the 选项 dialog box has partly been renamed and updated

The functions within the tabs have been simplified, made more consistent and better organized.

• Options

12th + 13th Gen Intel® Core™ Desktop Processors do not support the Simultaneous Fabric Preview faultlessly.

• Activate the Correct display errors with the latest Intel processors check box in case of error.
  文件 ribbon group -> 选项 dialog box -> 常规 tab -> Graphics Preference section
• Disable this function again if the presentation gets faulty.