How to Adjust the Shape Type

ShoulderGoreShapeTypeFrenchShoulderShapeType64SaddleShoulderShapeTypeRaglanShapeTypePullunderSlip-overShapeTypeTopShapeType

    • The dimensioned shape is open.
  1. Select the File ribbon on the top left.
    ApplicationPane_TabOpenFile
  2. Call up the Configuration menu.
  3. Select the button of the current shape type on the top left.
    Example: ShoulderGoreShapeTypeSet-in Sleeve
  4. Select the basic shape type in the left detail column.
    Example: RaglanShapeType Raglan
    • The possible settings for the selected shape type appear in the middle detail column.
  5. Select specific settings.
  6. Enter the determined value in the edit box for the Width under Stitch Density [10 cm]TextBox+Spin_10.00 in the Pattern group box of the right detail column.
  7. Enter the determined value in the edit box for the HeightTextBox+Spin_10.00.
  8. Select the desired needle action in the Filling ElementList Box White list box.
  9. Enter the determined value in the edit box for the WidthTextBox+Spin_10.00 under Stitch Density [10 cm] in the Waistband of Body group box.
  10. Enter the determined value in the edit box for the HeightTextBox+Spin_10.00.

    11. This value can differ from the stitch density of the basic pattern.

  11. Activate the CheckBoxOnKnitting Element for the Start check box.
    • The options for the waistband of the body appear.
  12. Select the start module for the body in the List Box White list box.
  13. Select the settings for the waistband of the body:

    • Quantity of Systems

    • Elastic Thread

    • Protection Yarn

    • Transition

    • Doubling

  14. Enter the determined value in the edit box for the WidthTextBox+Spin_10.00 under Stitch Density [10 cm] in the Cuff of Sleeve group box.
  15. Enter the determined value in the edit box for the HeightTextBox+Spin_10.00.
  16. Activate the CheckBoxOnKnitting Element for the Start check box.
    • The options for the cuff of the sleeve appear.
  17. Select the start module for the sleeve in the List Box White list box.
  18. Select the settings for the cuff of the sleeve:

    • Quantity of Systems

    • Elastic Thread

    • Protection Yarn

    • Transition

    • Doubling

  19. Click on the OK button.
    • All shapes and dimensionings will be deleted.
    • The selected shape type appears.