Evaluation of Value 1

Knitting-in

The value specifies the technical row of the module after which the yarn carriers are to be knitted in for the start. The modules for knitting-in are contained in the respective technical container module for the start. The value is entered for the individual modules for knitting-in.

Starts / Stoll / Elements / Knit-in yarn carrier

Binding-off

If binding-off is carried out within a neck, then the module is used with a direction that matches the carriage direction of the technical row in which it is to be inserted and that has the value <>0.
The value <>0 indicates that the module is entered in the pattern offset by the specified number of columns. A positive value offsets to the right and a negative value to the left.
If no module with a value <>0 is present, then a module with the value 0 is inserted.
The value is entered for the technical container modules.

Technical/Binding-off/<Knitting mode>/<Module group with binding-off modules>

e.g.
Structure double jersey BO-TC4-DJ-01

Narrowing/widening

The value specifies for which narrowing or widening width the module is used. If no module with the value is present that corresponds to the narrowing/widening width, the module with the value 0 is used.
: In addition, the direction must match the narrowing or widening direction in the pattern and the value must match the stepping in the pattern for Max. allowed racking.
The value is entered for the technical container modules.
During widening with the plug method, an offset can be specified for k&w to define the quantity of needles the docking module is to be inserted in the pattern offset to the shape edge.

Technical/Widening/<Knitting mode>/<Module group with widening modules>

Technical/Narrowing/<Knitting mode>/<Module group with narrowing modules>

e.g.
Structure double jersey/Standard

Intarsia - Net pick-up

As soon as the number of methods exceeds the number of individual modules in the pattern, it must be specified with which method this is to occur, when dealing with container modules. This must be specified with the following value.
Value = 5 >> 1-row with pattern tension
Value = 1 >> 3-row without transfer
The value is entered for the technical container modules.
: If a value other than 1 or 5 is used, the net pick-up is not entered into the pattern by Technical Processing.

Technical/intarsia - Net pick-up

Multi gauge transition coarse/fine

Value = 0 >> Pick-up split coarse
Value = 1 >> Pick-up stitch fine

Technical/MG_transition coarse/fine