Language
English
Deutsch
Chinese (simplified)
Italiano
Portuguese
Español
Français
Home
Current Help of the Release
What is new in M1plus?
What was new in 7.9?
What was new in 7.7?
What was new in 7.6?
What was new in 7.5?
What was new in 7.4?
What was new in 7.3?
What was new in 7.2?
What was new in 7.1?
Binding-off CA for Stamping-out k&w
What is new in OKC 6.5?
Specification "MSECK" - Carriage speed with small knots
New command "Y-RALL(n)" - Do not open the clamp of the yarn carrier
EFS Feed Wheels
APM Mode - Re-knitting an Already Done Ticket
PPS - Extended Knit Report
Adapters for switchable outputs and inputs
What was new in 7.0?
Kit for Devoré by One System
Pattern design technique on the M1plus
Pattern design technique on the CREATE PLUS
Working with the devoré equipment
EKC 2.0 / EKC 2.1
New "EXIT" command - Finalizing a cycle when a certain condition is fulfilled
New Cams for Gauge E16, E18, E8.2 and E9.2
Setup Editor – Save modified values together
W Machine - New Weft Yarn Carrier Qw
Deflecting Presser Foot for Upright Threads
ADF – Adjust Yarn Carrier Vertically
EKC2 machines
EKC ki - Introduction of series production of new machine types
Bc machine - two light barriers monitor the fabric
RFID
QR Code and Barcode Scanner
ADF 530-16 ki – Upgrade
Remote Desktop Connection RDP
Import or Export Machine Settings
APM Mode - Enabled by the Operator
MS=n - waiting time of carriage at reversion
EKC ki - Introduction of series production of new machine types
What was new in 6.10?
Direction of Transferring Inward the Dart
IF-decisions
EKC 1.4
Introduction of series production of new machine types
Specification "MSECK" - Carriage speed with small knots
New command "Y-RALL(n)" - Do not open the clamp of the yarn carrier
Apply Shape Counter
Set the counting method of the run-throughs
Saving the Master Setup file only
Stop the machine when the set number of run-through has been reached
No optimal production - The cause is displayed
Setup Editor – Save modified values together
Cleaning the touch screen
The position of the "Needle selection" button was modified
Roles and Rights - copy permissions
Edit Pattern - Find and Replace
ADF - List of the vertical corrections of the yarn carriers
PPS – Send message
What was new in 6.9?
Machine operating system EKC 1.3
Presser Feet on W Machines
Correction of Presser Feet (ESCI) on W Machines
Setup2 – "Presser Foot" tab
Set the presser foot type
Machine-specific NP correction (MC-NPK)
Correction of NP groups
NPGK (tab)
STOLL KnitLAN, Map Network Drives
PPS - Auto Production Mode (APM)
Test knitting program (TP)
Setup Editor - Enter a comment
Export Report Data
Master-Setup – use also with one position (knitting program)
Edit Pattern - Find and Replace
What was new in 6.8?
What's new in M1plus?
What was new in 6.6?
New Shape Symbols
Colors to Fill Knitting Elements
Overlapping Shape Elements
Fillings (Face and Motif) within M1plus Pattern
Shape Edge Attributes of GKS in M1plus
What was new in 6.5?
What was new in 6.4?
Fastening Filler Yarns at Lateral Fabric Selvedges
Example Pattern in Stoll Patternshop
Intarsia Net End for Jacquard Areas
Improvements for Working with CA
Jacquard in connection with intarsia
What was new in 6.3?
New Modules
New component type for CMS machines
Introduction of series production of new machine types
CMS ADF – New commands
Setup2 - additional cycle counters
Setup2 - Extension in the "YC/YCI" tab
Belt take-down - More precise adjustment of the fabric take-down value
CMS ADF - Setup2, extension in the "YC/YCI" tab
RS17=0 + RS17=1 - Optimized handling
What was new in 6.2?
Border processing for selective plating
Stoll-ikat plating ®
MSEC with autarkic courses
Jacquard and plating as neighboring areas
What was new in 6.1?
Machine type belt take-down - Changes
Belt take-down table
What was new in 6.0?
Optimized racking display in the design mode
Color Arrangements with repetition areas
New symbols for color arrangement
Design
Applications
Allocation via control column
Allocation via shape
Color Arrangements for binding off
Fast binding off with color arrangements - structure
Machine type band take-down - Support
Band take-down values
Control column for band take-down.
Pattern compatibility
Enhanced patterning support - CMS 502
Knit-in the yarn carrier on the opposite side
Knit yarn carrier over neck opening to home position
Application example - Knit yarn carrier over neck opening to home position
1x1 technique in the design mode
New, enhanced functions
Allocate CAs automatically - new options
Simultaneous drawing with pattern parameters in several patterns
Find and Select/Protect.
Frame within selection
Import Setup2 - Selection options
Add plating color
Number of YDopt Positions freely selectable
VJA^v
Lock processing steps
Stoll-knit and wear®
k&w Support
k&w - Distance between two Pieces
Module and Color Arrangements
M1plus Module Catalog
Color Arrangements for binding off
Starts for multi gauge
Starts with plating rows and elastic yarn
Starts with variable comb thread positioning
Fade-out with structure double jersey
Narrowing modules Structure double jersey
knit and wear - Binding-off body after the sleeve body connection
Narrowing modules for divided racking for E16/E18
Drag & drop from the Modules toolbar
Placing write-protected modules in the Module Explorer
Calling up Properties of Original Module in the Container Module Mirroring
Identification of local Modules of the Database
Shapes
FF shapes
Stoll-knit and wear®
ShapeWizard: Save as
ShapeWizard: Write protected file
Collar connection
Stamp-out mode - Save in a shape file before expanding
Shape editor - Knit and Wear all needles
ShapeSizer – Depth of the front and back neck gore
ShapeWizard: load different sleeves
Filled neckline, hole, opening with markings
Shape positioning in the Technical Mode
Miscellaneous
Central machine database
Exporting Global pattern parameters
Sintral function for comb x30S
Deleting plating colors not used in the pattern
Show stitch length in the background for the machine type x30S
Same cycle counters
Same Cycle Counters after Exporting - Importing RS?
Yarn carriers - Autarkic for plating
Adjustment program - excluded yarn carrier types
Visualization of horizontal pattern edges
Minitool Window - Fast Selection of Colors and Needle Actions
YLC - Data inclusion
Importing YLC5 data
Selection of the M1plus version
Color Number for Picture Import
What was new in 5.9?
CMS 502 HP [2] with reduced number of comb hooks
devoré knit border processing
Module and Color Arrangements
Comb thread modules for comb type 2
Devoré knit/Plush Jacquard Modules
Modules Stoll-devoré knit® - Plush
Devoré knit
Devoré knit Twill
Devoré knit Full / Twill
Plush 2-Row
Plush 1-Row
Plush
Devoré knit + Plush 2-Row
Devoré knit + Plush 1-Row
Devoré knit Twill + Plush 1-Row
Devoré knit Twill + Plush 2-Row
Binding-off with devoré knit
Narrowing for Structure Double Jersey (standard) reworked
Narrowing for Structure Double Jersey (2 Needles Narrowing RR...)
Stoll x30 S Modules
Plated k&w starts - Cardigan
Plated k&w starts - Short sleeve
Comb Thread FF
FF Yarn Carrier Knitting-in Modules
YLC reworked
Miscellaneous
Installation on Windows 8
Yarn information for the yarn carrier
Select and position the Control view window
Automatic Allocation of Color Arrangements for k&w Preview
Behavior of the yarn field setting when returning to the k&w basic pattern
Support of x30 S Fully Fashion
NP corrections for the right carriage in Setup2
Display of stitch length and transparent stitch length in one row
Distance between net pick-up and Jacquard
What was new in 5.8?
RS17=0 + RS17=1 - Application example
Module and Color Arrangements
Automatic allocation of Color Arrangements
K&w neckline and collar binding-off
Binding-off k&w neck with draw thread
New, enhanced functions
Zoom switching with (Z key) - additional function
Module identification - Function enhancement
Shapes
Display of the module names for local modules in the shape editor
Miscellaneous
Colors for Jacquard .AYT
Stitch via split curve
devoré knit - new Sintral syntax
Yarn Carrier Type: Fade out Inlay Q function
Thumbnails under Windows 7
What was new in 5.7?
devoré knit (devoré-technique)
New system function devoré knit/Plush in MC-Attribute
New control column system function devoré knit/Plush
Starts for devoré knit/Plush
Devoré knit/Plush 2-color-Jacquard-Module
Modules
Binding-off for tubular fabrics
Binding-off for DJ with fixing
Binding-off k&w neck without draw thread
Starts for devoré knit/Plush
Neckline with protection rows and cast-off
Knitting-in modules Stitch split interruption embroidery stitch
Knitting-in modules Split knot with fixing
Devoré knit/Plush 2-color-Jacquard-Module
Pointelle, Closing Stitch with Kick-back
DJ Widening with Closing-Stitch
Cables, Small Racking
Cable on 2x1 rib
4x3 cable in 1x1 technique
Widening Closing Stitch with Kick-back and Split (Structure single jersey)
New, enhanced functions
Distance between 2 k&w fabrics
Handling control column values
Open and close fabric take-down =WC(n)=
Do not enter S0Y in Sintral
Find & replace - Module toolbar
Module allocation for starts
Key combinations for setting the coordinate display
Key combinations for pattern scrolling
Profiles for toolbar and window settings
New system function devoré knit in MC-Attribute
Miscellaneous
Generate MC Jacquard newly
What was new in 5.6?
Shapes
Applying shape attributes from an existing shape
Pattern elements as shape marking
Modules
Widening modules closing stitch with Split
Jacquard modules for optimized embroidery stitches
New, enhanced functions
CA for Argyle 3,2"-6,2", opposite direction
Zoom switching with Z key
Miscellaneous
What was new in 4.1?
Steps of processing and pattern states
Module Explorer of Pattern
Symbol view
Draw with stitch lengths
Shape and structure in combination
Show the needle beds racked
Attributes at the cursor
Selection before and after expanding
Drawing Tools
Move areas in the pattern vertically
Shape
ENEAS Shaper
Global Pattern Parameters
Miscellaneous
What was new in 5.5?
Drawing Tools
Shapes
Modules
Starts 3x2 with comb
Starts 3x3 with comb
Pointelle closing stitch
Pointelle split-stitch
Widening with combined transfer, without Closing-Stitch
Jacquard Module 1x1 Technique Float with Castoff
1x1 Pointelle Closing Stitch
1x1-MG End Bind-off Tubular Draw thread
Save
Miscellaneous
What was new in 5.4?
Productivity Enhancement Pack (PEP)
Keeping Threads in a Disabled Clamp
Clamping-Parking position
CMS 502 HP
Multi-system Knitting for an Optimized Running Time
Yarn carrier staggering optimized by rows (YDopt)
Multiple Searching (Find & Replace Dialog Box)
Picture Import
Generating Jacquards more easily
Control Views (Expanding)
Cancel write protection temporarily
Panning
Zoom on Cursor Position
Measuring with the Cursor
Inserting the area at the selection border
Sintral Cycles within a k&w Start
knit&wear
Modules
Module for Knitting-in
Binding-off Modules with Fixing the 1x1 MG structure
1x1 Knit-Castoff
Module for Knitting-in and Locking of an Interrupted Embroidery Stitch
Jacquard Modules Float with Cast-off
Protection rows for 1x1 Technique with Cast-off
Compensation Rows with Float and Lock
Miscellaneous
Uniform optimized combining of the yarn carriers with Intarsia
Modules for the Needle Hook Gauge 4L
Binding-off modules for 4L
What was new in 5.2 and 5.3?
Yarn Field Allocation dialog box
Control Columns for Swiveling, Intarsia Binding and Knitting-out
Extensions of the Argyle drawing tool
Yarn Carrier Type Normal2 +/-
Setup2
Control Column WM% omitted
Section above the tables
D=direct within pattern parameter tables
Stoll-Sintral functions and Setup2
Cycle counters in Setup or Sintral
Yarn Length Control
Sintral Function Call for YLC3 in the Knitting Program
Sintral to Adjust the Stitch Cams
Program Settings for Sintral
Modules
Knitting-out with Float and Split
Color Arrangements for the Argyle Drawing Tool
Feeding with Float and Lock
Modules for Shape Marking
Modules for Braking Values
Module Arrangement with one module
Jacquard module 1x1 net with transfer
k&w start for short body
Broaden the Shape to Exceed the Shape Edge.
Miscellaneous
Last File (menu)
Yarn carriers stopped swiveled
Find and Replace
Insert rows in case of Jacquard
Direct Typing of Numbers
Stopping the Automatical Technical Processing
Load k&w shapes
Additional yarn carrier distance
Mouse Wheel for Zooming or Scrolling
Generating spikes for multi-step narrowing
Coordinate display at the cursor
Key call-up for aligning
Shifting Jacquard back
Microsoft Windows 7® operating system
Use module colors of the shape module
Fair Isle Markings for Plissee pleats
What was new in 5.1?
Modules
Widening modules closing with kicking for Fully Fashion
Knitting-in with Knot Split
Jacquard Modules for Argyle Pattern with Embroidery Stitch
Fair Isle and Doubling
Collar Modules for Cardigans
k&w-Starts
Slipover with Armhole Ribs
Modul Editor to the Front
Arrange Modules, Pattern Elements and Arrangements
Variants of Binding-off for Fully Fashion
Stamping-out - k&w Patterning Manually
Translucent Background
Pattern Examples on M1plus DVD
Clearer Icon for Goring
Undo after Expanding (preview)
Miscellaneous
What was new in 5.0?
Stoll-knit and wear®
Nothing replaces a personal training...
More easily to the k&w pattern
Space suspending
Folding the Fair Isle area in and out
k&w arrangements
Shape Part Colors
k&w-Modules
Tape Bind-Off 730 S / 830 S
Sleeve/Body Crossover
ShapeSizer
New k&w Shapes within the ShapeSizer
Remaining Narrowing in the Shoulder Area
Neck Gore in the Area of the Raglan Sleeve
Module Arrangement in the k&w Basic Pattern
k&w pattern from M1
Pleated Skirt Modules
Intarsia pattern
Let the Yarn Carriers be Proposed
Avoid Yarn Carrier Collisions
Shape Tools
Shape attributes toolbar
Aligning symbols
Folding in and out over areas outside the shape.
Move the shape
Arrangements
Color Arrangements with separate shape segments
CA with outside shape
Generate and edit CA and MA
Modules
Modules for CMS 730 S / 830 S
Starts with Optimized Running Time
Binding-off modules
Float and lock
Modules for 2 pieces (Tandem with comb)
Protection Rows (with comb)
Lateral Binding-off of one Single Layer
Multi-piece knitting with 2x16 Clamping/Cutting Points
Drawing Tools
Miscellaneous of version 5.0
SELAN Online
Pattern example
Search and Select
Delete Starts from the Module Explorer of Database
New Machines
Assistance to Calculate Set-in Sleeve
Width Cycles and Correcting the Edge
Variants of Plissee
Plissee Variant 1
Plissee Variant 2
What was new in 7.7?
What was new in 7.6?
What was new in 7.5?
What was new in 7.4?
What was new in 7.3?
What was new in 7.2?
What was new in 7.1?
Binding-off CA for Stamping-out k&w
What is new in OKC 6.5?
Specification "MSECK" - Carriage speed with small knots
New command "Y-RALL(n)" - Do not open the clamp of the yarn carrier
EFS Feed Wheels
APM Mode - Re-knitting an Already Done Ticket
PPS - Extended Knit Report
Adapters for switchable outputs and inputs
What was new in 7.0?
Kit for Devoré by One System
Pattern design technique on the M1plus
Pattern design technique on the CREATE PLUS
Working with the devoré equipment
EKC 2.0 / EKC 2.1
New "EXIT" command - Finalizing a cycle when a certain condition is fulfilled
New Cams for Gauge E16, E18, E8.2 and E9.2
Setup Editor – Save modified values together
W Machine - New Weft Yarn Carrier Qw
Deflecting Presser Foot for Upright Threads
ADF – Adjust Yarn Carrier Vertically
EKC2 machines
EKC ki - Introduction of series production of new machine types
Bc machine - two light barriers monitor the fabric
RFID
QR Code and Barcode Scanner
ADF 530-16 ki – Upgrade
Remote Desktop Connection RDP
Import or Export Machine Settings
APM Mode - Enabled by the Operator
MS=n - waiting time of carriage at reversion
EKC ki - Introduction of series production of new machine types
What was new in 6.10?
Direction of Transferring Inward the Dart
IF-decisions
EKC 1.4
Introduction of series production of new machine types
Specification "MSECK" - Carriage speed with small knots
New command "Y-RALL(n)" - Do not open the clamp of the yarn carrier
Apply Shape Counter
Set the counting method of the run-throughs
Saving the Master Setup file only
Stop the machine when the set number of run-through has been reached
No optimal production - The cause is displayed
Setup Editor – Save modified values together
Cleaning the touch screen
The position of the "Needle selection" button was modified
Roles and Rights - copy permissions
Edit Pattern - Find and Replace
ADF - List of the vertical corrections of the yarn carriers
PPS – Send message
What was new in 6.9?
Machine operating system EKC 1.3
Presser Feet on W Machines
Correction of Presser Feet (ESCI) on W Machines
Setup2 – "Presser Foot" tab
Set the presser foot type
Machine-specific NP correction (MC-NPK)
Correction of NP groups
NPGK (tab)
STOLL KnitLAN, Map Network Drives
PPS - Auto Production Mode (APM)
Test knitting program (TP)
Setup Editor - Enter a comment
Export Report Data
Master-Setup – use also with one position (knitting program)
Edit Pattern - Find and Replace
What was new in 6.8?
What's new in M1plus?
What was new in 6.6?
New Shape Symbols
Colors to Fill Knitting Elements
Overlapping Shape Elements
Fillings (Face and Motif) within M1plus Pattern
Shape Edge Attributes of GKS in M1plus
What was new in 6.5?
What was new in 6.4?
Fastening Filler Yarns at Lateral Fabric Selvedges
Example Pattern in Stoll Patternshop
Intarsia Net End for Jacquard Areas
Improvements for Working with CA
Jacquard in connection with intarsia
What was new in 6.3?
New Modules
New component type for CMS machines
Introduction of series production of new machine types
CMS ADF – New commands
Setup2 - additional cycle counters
Setup2 - Extension in the "YC/YCI" tab
Belt take-down - More precise adjustment of the fabric take-down value
CMS ADF - Setup2, extension in the "YC/YCI" tab
RS17=0 + RS17=1 - Optimized handling
What was new in 6.2?
Border processing for selective plating
Stoll-ikat plating ®
MSEC with autarkic courses
Jacquard and plating as neighboring areas
What was new in 6.1?
Machine type belt take-down - Changes
Belt take-down table
What was new in 6.0?
Optimized racking display in the design mode
Color Arrangements with repetition areas
New symbols for color arrangement
Design
Applications
Allocation via control column
Allocation via shape
Color Arrangements for binding off
Fast binding off with color arrangements - structure
Machine type band take-down - Support
Band take-down values
Control column for band take-down.
Pattern compatibility
Enhanced patterning support - CMS 502
Knit-in the yarn carrier on the opposite side
Knit yarn carrier over neck opening to home position
Application example - Knit yarn carrier over neck opening to home position
1x1 technique in the design mode
New, enhanced functions
Allocate CAs automatically - new options
Simultaneous drawing with pattern parameters in several patterns
Find and Select/Protect.
Frame within selection
Import Setup2 - Selection options
Add plating color
Number of YDopt Positions freely selectable
VJA^v
Lock processing steps
Stoll-knit and wear®
k&w Support
k&w - Distance between two Pieces
Module and Color Arrangements
M1plus Module Catalog
Color Arrangements for binding off
Starts for multi gauge
Starts with plating rows and elastic yarn
Starts with variable comb thread positioning
Fade-out with structure double jersey
Narrowing modules Structure double jersey
knit and wear - Binding-off body after the sleeve body connection
Narrowing modules for divided racking for E16/E18
Drag & drop from the Modules toolbar
Placing write-protected modules in the Module Explorer
Calling up Properties of Original Module in the Container Module Mirroring
Identification of local Modules of the Database
Shapes
FF shapes
Stoll-knit and wear®
ShapeWizard: Save as
ShapeWizard: Write protected file
Collar connection
Stamp-out mode - Save in a shape file before expanding
Shape editor - Knit and Wear all needles
ShapeSizer – Depth of the front and back neck gore
ShapeWizard: load different sleeves
Filled neckline, hole, opening with markings
Shape positioning in the Technical Mode
Miscellaneous
Central machine database
Exporting Global pattern parameters
Sintral function for comb x30S
Deleting plating colors not used in the pattern
Show stitch length in the background for the machine type x30S
Same cycle counters
Same Cycle Counters after Exporting - Importing RS?
Yarn carriers - Autarkic for plating
Adjustment program - excluded yarn carrier types
Visualization of horizontal pattern edges
Minitool Window - Fast Selection of Colors and Needle Actions
YLC - Data inclusion
Importing YLC5 data
Selection of the M1plus version
Color Number for Picture Import
What was new in 5.9?
CMS 502 HP [2] with reduced number of comb hooks
devoré knit border processing
Module and Color Arrangements
Comb thread modules for comb type 2
Devoré knit/Plush Jacquard Modules
Modules Stoll-devoré knit® - Plush
Devoré knit
Devoré knit Twill
Devoré knit Full / Twill
Plush 2-Row
Plush 1-Row
Plush
Devoré knit + Plush 2-Row
Devoré knit + Plush 1-Row
Devoré knit Twill + Plush 1-Row
Devoré knit Twill + Plush 2-Row
Binding-off with devoré knit
Narrowing for Structure Double Jersey (standard) reworked
Narrowing for Structure Double Jersey (2 Needles Narrowing RR...)
Stoll x30 S Modules
Plated k&w starts - Cardigan
Plated k&w starts - Short sleeve
Comb Thread FF
FF Yarn Carrier Knitting-in Modules
YLC reworked
Miscellaneous
Installation on Windows 8
Yarn information for the yarn carrier
Select and position the Control view window
Automatic Allocation of Color Arrangements for k&w Preview
Behavior of the yarn field setting when returning to the k&w basic pattern
Support of x30 S Fully Fashion
NP corrections for the right carriage in Setup2
Display of stitch length and transparent stitch length in one row
Distance between net pick-up and Jacquard
What was new in 5.8?
RS17=0 + RS17=1 - Application example
Module and Color Arrangements
Automatic allocation of Color Arrangements
K&w neckline and collar binding-off
Binding-off k&w neck with draw thread
New, enhanced functions
Zoom switching with (Z key) - additional function
Module identification - Function enhancement
Shapes
Display of the module names for local modules in the shape editor
Miscellaneous
Colors for Jacquard .AYT
Stitch via split curve
devoré knit - new Sintral syntax
Yarn Carrier Type: Fade out Inlay Q function
Thumbnails under Windows 7
What was new in 5.7?
devoré knit (devoré-technique)
New system function devoré knit/Plush in MC-Attribute
New control column system function devoré knit/Plush
Starts for devoré knit/Plush
Devoré knit/Plush 2-color-Jacquard-Module
Modules
Binding-off for tubular fabrics
Binding-off for DJ with fixing
Binding-off k&w neck without draw thread
Starts for devoré knit/Plush
Neckline with protection rows and cast-off
Knitting-in modules Stitch split interruption embroidery stitch
Knitting-in modules Split knot with fixing
Devoré knit/Plush 2-color-Jacquard-Module
Pointelle, Closing Stitch with Kick-back
DJ Widening with Closing-Stitch
Cables, Small Racking
Cable on 2x1 rib
4x3 cable in 1x1 technique
Widening Closing Stitch with Kick-back and Split (Structure single jersey)
New, enhanced functions
Distance between 2 k&w fabrics
Handling control column values
Open and close fabric take-down =WC(n)=
Do not enter S0Y in Sintral
Find & replace - Module toolbar
Module allocation for starts
Key combinations for setting the coordinate display
Key combinations for pattern scrolling
Profiles for toolbar and window settings
New system function devoré knit in MC-Attribute
Miscellaneous
Generate MC Jacquard newly
What was new in 5.6?
Shapes
Applying shape attributes from an existing shape
Pattern elements as shape marking
Modules
Widening modules closing stitch with Split
Jacquard modules for optimized embroidery stitches
New, enhanced functions
CA for Argyle 3,2"-6,2", opposite direction
Zoom switching with Z key
Miscellaneous
What was new in 4.1?
Steps of processing and pattern states
Module Explorer of Pattern
Symbol view
Draw with stitch lengths
Shape and structure in combination
Show the needle beds racked
Attributes at the cursor
Selection before and after expanding
Drawing Tools
Move areas in the pattern vertically
Shape
ENEAS Shaper
Global Pattern Parameters
Miscellaneous
What was new in 5.5?
Drawing Tools
Shapes
Modules
Starts 3x2 with comb
Starts 3x3 with comb
Pointelle closing stitch
Pointelle split-stitch
Widening with combined transfer, without Closing-Stitch
Jacquard Module 1x1 Technique Float with Castoff
1x1 Pointelle Closing Stitch
1x1-MG End Bind-off Tubular Draw thread
Save
Miscellaneous
What was new in 5.4?
Productivity Enhancement Pack (PEP)
Keeping Threads in a Disabled Clamp
Clamping-Parking position
CMS 502 HP
Multi-system Knitting for an Optimized Running Time
Yarn carrier staggering optimized by rows (YDopt)
Multiple Searching (Find & Replace Dialog Box)
Picture Import
Generating Jacquards more easily
Control Views (Expanding)
Cancel write protection temporarily
Panning
Zoom on Cursor Position
Measuring with the Cursor
Inserting the area at the selection border
Sintral Cycles within a k&w Start
knit&wear
Modules
Module for Knitting-in
Binding-off Modules with Fixing the 1x1 MG structure
1x1 Knit-Castoff
Module for Knitting-in and Locking of an Interrupted Embroidery Stitch
Jacquard Modules Float with Cast-off
Protection rows for 1x1 Technique with Cast-off
Compensation Rows with Float and Lock
Miscellaneous
Uniform optimized combining of the yarn carriers with Intarsia
Modules for the Needle Hook Gauge 4L
Binding-off modules for 4L
What was new in 5.2 and 5.3?
Yarn Field Allocation dialog box
Control Columns for Swiveling, Intarsia Binding and Knitting-out
Extensions of the Argyle drawing tool
Yarn Carrier Type Normal2 +/-
Setup2
Control Column WM% omitted
Section above the tables
D=direct within pattern parameter tables
Stoll-Sintral functions and Setup2
Cycle counters in Setup or Sintral
Yarn Length Control
Sintral Function Call for YLC3 in the Knitting Program
Sintral to Adjust the Stitch Cams
Program Settings for Sintral
Modules
Knitting-out with Float and Split
Color Arrangements for the Argyle Drawing Tool
Feeding with Float and Lock
Modules for Shape Marking
Modules for Braking Values
Module Arrangement with one module
Jacquard module 1x1 net with transfer
k&w start for short body
Broaden the Shape to Exceed the Shape Edge.
Miscellaneous
Last File (menu)
Yarn carriers stopped swiveled
Find and Replace
Insert rows in case of Jacquard
Direct Typing of Numbers
Stopping the Automatical Technical Processing
Load k&w shapes
Additional yarn carrier distance
Mouse Wheel for Zooming or Scrolling
Generating spikes for multi-step narrowing
Coordinate display at the cursor
Key call-up for aligning
Shifting Jacquard back
Microsoft Windows 7® operating system
Use module colors of the shape module
Fair Isle Markings for Plissee pleats
What was new in 5.1?
Modules
Widening modules closing with kicking for Fully Fashion
Knitting-in with Knot Split
Jacquard Modules for Argyle Pattern with Embroidery Stitch
Fair Isle and Doubling
Collar Modules for Cardigans
k&w-Starts
Slipover with Armhole Ribs
Modul Editor to the Front
Arrange Modules, Pattern Elements and Arrangements
Variants of Binding-off for Fully Fashion
Stamping-out - k&w Patterning Manually
Translucent Background
Pattern Examples on M1plus DVD
Clearer Icon for Goring
Undo after Expanding (preview)
Miscellaneous
What was new in 5.0?
Stoll-knit and wear®
Nothing replaces a personal training...
More easily to the k&w pattern
Space suspending
Folding the Fair Isle area in and out
k&w arrangements
Shape Part Colors
k&w-Modules
Tape Bind-Off 730 S / 830 S
Sleeve/Body Crossover
ShapeSizer
New k&w Shapes within the ShapeSizer
Remaining Narrowing in the Shoulder Area
Neck Gore in the Area of the Raglan Sleeve
Module Arrangement in the k&w Basic Pattern
k&w pattern from M1
Pleated Skirt Modules
Intarsia pattern
Let the Yarn Carriers be Proposed
Avoid Yarn Carrier Collisions
Shape Tools
Shape attributes toolbar
Aligning symbols
Folding in and out over areas outside the shape.
Move the shape
Arrangements
Color Arrangements with separate shape segments
CA with outside shape
Generate and edit CA and MA
Modules
Modules for CMS 730 S / 830 S
Starts with Optimized Running Time
Binding-off modules
Float and lock
Modules for 2 pieces (Tandem with comb)
Protection Rows (with comb)
Lateral Binding-off of one Single Layer
Multi-piece knitting with 2x16 Clamping/Cutting Points
Drawing Tools
Miscellaneous of version 5.0
SELAN Online
Pattern example
Search and Select
Delete Starts from the Module Explorer of Database
New Machines
Assistance to Calculate Set-in Sleeve
Width Cycles and Correcting the Edge
Variants of Plissee
Plissee Variant 1
Plissee Variant 2
M1plus Philosophy
From draft to fabric
Expand modules and arrangements
Technical Processing and Sintral Check
Further tasks to do with M1plus
The new features of M1plus
Design Mode
Menu structure of the M1plus
Setting up the M1plus Pattern Workstation
Hardware-Requirements
Setting back the Restrictive Safety Settings of Windows Vista
M1plus with knitelligence Smart Card
Smart Card, Copy Protection and Settlement System
How to Choose the Product Variant
How to register yourself as STOLL customer
How to Buy a License
How to Load a New License to the Smart Card
How to Use the Smart Card
How to Extend the License Term
How to Install the Software
How to Keep the Software up to Date
STOLL M1plus Smartcard up to 2021
Installing the M1plus software
Installation in Parallel
M1plus Directories and Paths
SELAN Online
Version of M1plus when Double Clicking Files
Open the pattern in a specific M1plus version
Installing an Additional M1 Version 3.x
SELAN Online
Set the Screen Resolution to 120dpi
Peripherals
Knit Memory Card Adapter
M1plus Peripheral Device Keys (e.g. Keypad Logitech G13)
Uninterruptable power supply UPS
Restore module database
Saving and archiving data
Change the language
Screen magnifier
Computer virus scanner
Help on Help
Call up the M1plus help
Help for the M1plus main program
Symbols of the M1plus help
Full-text Search within the M1plus Help
M1plus main program
Views / Editors
Symbol view
Symbol View (Shape)
Context menu (Symbol View)
Display the module in the Module Explorer of Pattern
Display the module in the Module Explorer of Database
Select module within the Module Arrangement
Select color area within the Color Arrangement
Display the k&w Arrangement in the Module Explorer of Pattern...
Display the k&w Arrangement in the Module Explorer of Database...
Edit k&w Arrangement...
Display Reference Edges
Update Reference Edges
Display k&w double allocation
Recalculate k&w Shape Width
Highlight k&w layer
Initialize Markings for Multi-Step Narrowing
Adjust Markings for Multi-Step Narrowing
Generating spikes for multi-step narrowing
Display MC Jacquard symbols
Display Structure Shadings
Set Stitch Density...
Save settings
Comment
Comment / Pin 1 - Pin 4
Comment / Text...
Comment / Graphic...
Comment / Next
Comment / Previous
Comment / First
Comment / Last
Comment / Center Current Comment
Comment / Edit
Comment / Delete
Comment / Move Comments to Origin
Fabric View
Context menu (fabric view)
Edit module
Technical view
Context menu (technical view)
Raise yarn carrier
Change yarn carrier path
Display Front Needle Bed
Display Rear Needle Bed
Highlight k&w layer
Show Needle Occupancy
Single Assignment Knitting Layer L0
Single Assignment Knitting Layer L1
Double assignment
Show Racking
Highlight multi gauge grid
Display Additional Beds
Display Background Color for Additional Beds
Comment
Overview window
Context menu (overview window)
Delete All Saved Positions
Height
Width
Settings
Save Position
Restore Position
Delete Buffer
Position memory
Yarn field view
Context menu (yarn field view)
Yarn Field Allocation
Yarn field table
Yarn carrier number
Yarn Carrier Type
Multi-system knitting
System sequence and mirrored system sequence
Plating
Combine Yarn Carriers
Swivel
Knitting-in
Knitting-out
Intarsia Binding
Intarsia Border Processing
Clamping / cutting
System
Border Fixation
Yarn Carrier Correction
Yarn carrier allocation (Yarn field allocation)
Propose Rail Allocation (dialog box)
Save
Context Menu (MA/CA Editor)
Color Arrangement Editor (k&w)
Module Arrangement Editor
Jacquard Editor
Cursor
Default
Crosshairs
Coordinate display
Coordinate Display / Settings...
Show Cursor Position in All Views
Measuring with the Cursor
Control Views (Expanding)
Cancel write protection temporarily
Control columns
Technical row
Pattern Row
Sintral / Jacquard
Knitting Layer
Stroke
Carriage Direction
System Function
System
Fabric Take-down, Main Take-down, Auxiliary Take-down, Fabric Sensor
Belt Take-down (control column)
Comb, collecting area
Carriage speed, machine slow, machine stop
Yarn Length Control
PRINT
Function Calls
Transfer Surrounding
Multi-system Transferring
Combine casting-off + transfer
Separate k&w transferring layers
Sequence of Technical Rows
Presser Foot (ADF-W, CMS-W)
Presser Foot Correction (ESCI)
Presser foot (CMS-S)
Front Holding-down Device, Back Holding-down Device
Front stitch length, back stitch length
Stitch length (second stitch tension) in front, Stitch length (second stitch tension) at rear
Reclaiming in front, Reclaiming at rear
Cycles
Border Fixation
Yarn Carriers
YDI (Setup2)
YCI (Setup2)
Rear-front jacquard selection
Module Arrangement
k&w Arrangement
Color Arrangement
Swiveling for yarn carriers (control column)
Intarsia binding (control column)
No Knitting-out (control column)
Racking Correction
Front racking, Rear racking, Additional needle bed racking
Selection
Context menu (control columns)
Display and hide control columns
Select control columns (dialog box)
Feed wheel (control column)
Column bar
Context menu (column bar)
Cycles
Coordinate Display of needle bed center
Setting needle bed center
Delete needle bed center
Fill selected columns
Select columns
Menu bar (M1plus)
File
New Pattern...
New Shape (shr)...
New MC Jacquard...
Open...
Close
Save
Save As...
Save Fabric or Symbol View as Picture...
Save as MC Jacquard...
Save intermediate backup/Load the last
Import
Picture as Pattern...
Picture as Pattern Element...
Sintral Check as Pattern...
Import MC Jacquard...
GKS Dimensioned Shape ...
Modules...
Properties...
Statistics
Last File
Exit M1plus
Edit
Undo
Redo
Cut
Copy
Paste
Insert Mirrored
Insert area...
Delete (Area/Rows/Columns)
Mirror Pattern
Module Position and Color
Modules Mirrored and Color
Only color
Mirror k&w Design to Knitting Layer L1...
Find & Replace...
Replace Starts...
1x1 Technical...
Border processing for selective plating...
Generate or Edit Jacquards...
Resort additional needle bed transfer
Define Reference Row
Define Insert pattern row (k&w starts)
Adjust Reference Row Numbers in CA...
Convert Take-down Values
View
Open New Fabric View
Open New Symbol View
Open New Technical View
Open Yarn Field View...
Open Write-protected View
Basic pattern
Shaped Pattern
Expanded Pattern (Symbol View)
Expanded Pattern (Technical View)
Expanded Pattern (Fabric View)
Processed Pattern (Symbol View)
Processed Pattern (Technical View)
Processed Pattern (Fabric View)
Processed Pattern 2 pieces (Symbol View)
Processed Pattern 2 pieces (Technical View)
Processed Pattern 2 pieces (Fabric View)
Activate Automatic Transfer
Display Module Limits
Show Comments
Grid
Ruler
Horizontally
Vertically
Go to Ruler (H)
Go to Ruler (V)
Overview
Stitch Display in the Module
Activate Modifying (Stitch Display)
Reset Stitches
Raise Stitches
Lower Stitches
Toolbars
Original Workspace
Save Arrangement
Load Workspace
Selection
Select All
Cancel Selection
Go to Selection
Partly Selected Modules
Select Partially Selected Modules Completely
Cancel Selection of Partly Selected Modules
Enlarge Selection to a Row Selection
Enlarge Selection to a Column Selection
Invert Selection
Protect
Protect Selection
Protect Area Outside Selection
Cancel Protection from Selection
Unprotect Completely
Display Protection
Group
Group to one Pattern Row (selection)
Ungroup
Apply Module Data to Selected Technical Rows
Module
New
Module...
Jacquard Module...
Color Arrangement...
Module Arrangement...
Combination Module...
Step Module...
Technical Container Module...
Container Module Mirroring...
k&w Arrangement...
Generate from Selection
Module (Generate from Selection)
Pattern element (Generate from selection)
Color Arrangement (Generate from Selection)
Module Arrangement (Generate from Selection)
Switch the Number of Needle Beds to
4 Needle Beds (TC-T/TC-R/TC4)
2 Needle Beds (Switch Number of Needle Beds to)
Symbols for Symbol View
Display (Symbols for Symbol View)
Allocate (Symbols for Symbol View)
Update (Symbols for Symbol View)
Use Latest Module Versions...
Set Newly (k&w Column Layer)
Remove (k&w column layer)
Set Docking Points
Insert Modules (Settings)
Insert Relatively
Enter Module Racking
Retain Pattern Racking
Insert New Rows for Module Racking
Large before Small Racking
Small before Large Racking
Left before Right Racking
Right before Left Racking
Without Adjustment - Keep Grouping of Pattern
Without Adjustment - Apply Grouping of Module
Display Modules in Use...
Insert Row for Limit Condition
Insert Row for Limit Module
Module Explorer of Pattern...
Module Explorer of Database...
Shape
Shape Editor (Generate or Edit Shapes)...
Shapewizard (Put together k&w shape)...
ShapeSizer...
Generate Pure Shape
Open and Position Shape...
Open and Position Shape (Stamp-out)...
Reload Shape...
Inserting Narrowing and Widening
Insert Binding-Off...
Shape attributes...
Add Missing Edges
Convert Shape (shr) -> Stitch Based Shape (shp)
Save Shape As
Remove Shape
Edit Shape:
Pattern Parameters
Configuration...
Change Machine/Gauge/Setup type...
Machine Attributes...
Technical Row Data
Yarn Carrier...
Racking...
PRINT...
Knitting Sequence...
Function Calls...
Stitch Length...
Stitch length (second tension)...
Reclaim...
Fabric Take-Down...
Auxiliary take-down...
Belt Take-Down...
Cycle...
Carriage Speed...
Racking correction...
Global Pattern Parameters...
MC Program
Sintral Functions...
Generate MC Program
Run Sintral Check...
Load MC program in machine...
Cardimag... (Save MC Program)
KMC... (Save MC Program)
Floppy Disk... (Save MC Program)
Setup File... (Import MC Setup)
Cardimag... (Import MC Setup)
KMC... (Import MC Setup)
Sintral (Display MC Program)
MC Jacquard (Display MC Program)
MC Jacquard unpacked (Display MC Program)
MC Setup (Display MC Program)
Extract MC Program...
Generate Sequence with...
Tools
Machine Explorer...
Sintral Editor...
Sequence Editor...
Sequence List Editor...
Knit Memory Card...
Display Log of Processing...
Sintral Check...
Order Menu...
Program Settings...
Edit Picture...
Windows
New Window
Cascade
Tile Horizontally
Tile Vertically
Arrange Symbols
List of the open views
Question mark (?)
Help Topics
Sintral Pocket Card
About Stoll M1plus...
Toolbars (M1plus)
Default
Zoom
Comments
Steps of Processing
Load basic pattern
Load shaped pattern
Load Expanded Pattern
Load processed pattern
Load Re-processed Pattern
Load pattern for two pieces
Load re-processed pattern for two pieces
Cut-out shape
Expand pattern
Start Technical Processing
Start re-processing
Start processing for 2 pieces
Start Re-processing for 2 pieces
Pattern Presentation
Shape edges / Shape symbols
Yarn Carriers
Needle Actions
Stitch Length
Stitch Length as Needle Action Background
Align horizontally
Align vertically
Drawing Tools
Pencil
Line
Cycle Line (Option)
Rectangle/Square
Ellipse/Circle
Polygon
Spline
Draw with Selection
Fill line up to color change
Fill with the Magic Wand
Fill selection
Multi-Copy
Drawing with Keyboard
Space
Moving
Adjust selection
Rotate selection
Inserting a frame
Mirroring
Argyle
Adopt module/color/pattern parameters
Identify and Select Module
Toggle Move Shape
Protect Outside Shape
Cancel Cursor Functions
Tool Properties
Pattern Colors
Symbols (pattern colors)
Context menu (pattern colors)
Context menu (Yarn carrier colors)
Color icons and color numbers
Plating (toolbar)
Module data
Modules
Context menu (Module toolbar)
Modules of Database tab
Local modules tab and pattern elements
Local Module Arrangements tab
Local Color Arrangements tab
Local k&w Arrangement Tab
Needle actions – Stitch length
Needle actions – Stitch length (Yarn insertion)
Needle actions – Stitch length (further actions)
Stitch Length
Shape Attributes
Combination of shape attributes in the symbol view [shape]
Outside shape
Shape Part Color (within shape): <No.>
Edge: <No.>
Marking:<No.>
Goring
Suspend to the bottom or to the top
k&w suspend
Narrow/Widen
Fade-out
Separation
Binding-off
Stitch length change
Align within shape part to the left or to the right
Align to the left or right
Separation of layers
Placing Border Markings
Border Options
Remove shape attributes
Move lines
Fixed stepping
Selection
Automatic step with copied area
Use on both sides
Multi-step narrowing above or underneath
Status Bar
Status Line (symbol view, fabric view, technical view)
Status line (display bars of the technical view)
Status line (yarn field view)
Status Line (Symbol View [Shape])
Status line (jacquard editor)
Status line for the selection and drawing with modules
Status line when Changing the Yarn Carrier Path
Color Arrangement
repetitions
Excess width
Excess Width also at the Shape Edge
Border Processing
Jacquard
Undefined Area
Setting for transferring the shape
Settings for Transferring the Structure
Transferring the Structure not Allowed
Delete aligning
Settings for Auto Transferring
Allocate repetition area
Reference row number
Additional Row
Knitting layer L0 and L1
Delete
Pattern Presentation k&w
Control Views
Key combinations (M1plus main program)
Key combinations for M1plus-Menus
Dialog Boxes (M1plus)
New Pattern
Shapes section
Doubling section
Start section
Module: <Module name> (Dialog Box)
New Module
New Module Arrangement
New Color Arrangement
New combination module
New step module
New technical container module
New container module mirroring
New jacquard editor
Jacquard Module Definition
Configuration/k&w Configuration
Sintral tab
Knitting Areas tab
Knitting Areas (k&w) tab
Transfer tab
Transfer (k&w) tab
Intarsia (Configuration)
Intarsia tab (Global Pattern Parameters)
Intarsia k&w/Intarsia all needles TC-T k&w (Configuration)
Intarsia k&w/Intarsia all needles TC-T k&w tab (Global pattern parameters)
Comb, Clamping tab
Comb, Clamping (k&w) tab
Additional settings tab
Additional settings (k&w) tab
Select Machine
Own machines tab
Stoll machines tab
Favorites tab
Open
Save pattern under...
Import Sintral Check
Import modules
Mirroring (dialog box)
Import modules - safety prompt
Save data in img-file
Save data on Knit Memory Card (dialog box)
Save data to floppy disk (dialog box)
Pattern description
Statistics
Colors tab
Stitches tab
Stitch length tab
Carriage speed tab
Fabric take-down tab
Racking tab
Properties of: <module name/module group name>
Description tab
Cycles tab
Gauge tab
Technical tab
JAC net type tab
Version list for <module name>
Specify no. of colors of generator
Set Write Protection
Deactivate Write Protection
Set Docking Points
New Shape
Save Shape As (Dialog box)
Module links (dialog box)
Find & replace (dialog box)
Replace or exchange (tab)
Find and Select (tab)
Go to (Tab)
Multiple Find and Replace
Multiple Search and Select
Replace Starts
Insert/replace k&w start
1x1-Technique
Module/Pattern Element: Data Transfer
Insert Area
Insert Rows <pattern name>
Adjustments for new pattern rows
Adjustments for new arrangement rows
Insert Columns <pattern name>
Insert columns (CA Editor)
Insert rows/columns in shape
Insert rows (Jacquard-Editor)
Insert columns (Jacquard-Editor)
Number rows
Jacquards (dialog box)
Jacquards
Generate a new Jacquard area
Edit a jacquard area:
Generate a new Jacquard area and increase the color quantity
Color Sequence and Stitch Length
Change color sequence
Exchange yarn color
Change stitch length of a yarn color
Increase the number of colors
Properties of Jacquard
No. of colors
Knitting Layer
Picture side
Cancel Jacquard
Ladder Back
Convert jacquard type
Transition Module
Reference Row Numbers in CA
Open (shape)
Open (k&w stamp-out)
New attribute group
New Shape Edge / New Marking
Copy attributes
Replace modules cut into
Information
Warning
Settings
Create new color palette
Load color palette
Rename color palette
Ruler properties
Edit comment
Colors
Open k&w shapes
Stitch Density
Technical Row Data
Yarn carrier tab
Racking tab
PRINT tab
Knitting sequence tab
Function calls tab
Language setting
Language of PRINT instructions
Replace table entry
Frame
Cycles
KI/K<I>
Program Settings
Save tab
Load tab
Views tab
Shape view tab
Fonts tab
Directories tab
Help system tab
Sintral tab
Miscellaneous tab
Edit cycle element
Import setup
Machine attributes
General tab
Options tab
System functions tab
Presser Foot tab
Yarn carrier allocation (Machine attributes)
Specifications (section in the Yarn carrier allocation dialog box)
Sintral Functions
Sintral function table
Head / Transition / Start
Parameter
Shape Attributes
Default Attributes section
Table of the edges/markings
Toolbar and buttons (Shape attributes dialog box)
General tab (shape edge)
General tab (markings)
Narrowing/Narrowing M tab
Binding-off tab
Widening tab
Fade-out tab
Start tab
End tab
Connections tab
Shape Element Properties Tab
Color
Group
Function
Selection of reference line
Divide pattern
Text as pattern element
Assigning symbols for the symbol view
Check of Color Arrangement
Insert/Delete suspension
Add Missing Edges (dialog box)
Mirror k&w Design to Knitting Layer L1
Coupling width
k&w Correction of Widening
Argyle (dialog box)
Exchange Colors of the Rhombuses
k&w Options for Cut-out
Replace old versions of module
Coordinate Display (dialog)
Modified or no longer used yarn fields (dialog)
Query
Presettings (dialog)
Conversion of shr -> shp
Yarn information
Feed Wheel Information
Border processing for selective plating
Border Processing Jacquard / Net-end
Module – Working with Modules and Arrangements
The Module Explorer of Database and Pattern
Basic information about the Module Explorer
Module links
Module groups
New Modules
Lost & Found
User
Starts
Favorites
Jacquard
k&w Technique
k&w Favorites
knit and wear
Stoll
Technique
k&w Arrangements in the Module Explorer
Context menu (Modules and Arrangements)
Insert Module <- Clipboard
Create link -> Clipboard
Create Copy
Generate Color Arrangement
Edit module
Show module in Explorer
Select All Modules
Delete Module
Delete Directory
Remove modules not in use
Rename...
Export
Save in Database
Display Links...
Properties...
Module Support
Versions...
Set Write Protection
Deactivate Write Protection
View
Context menu (module groups)
Insert Link <- Clipboard
Create link -> Clipboard
Create Copy
New module group
Delete Directory
Remove modules not in use
Module Names
Descriptions of technical container modules
List of description of container modules
Module types
Simple module
Combination module
Step module
Technical container module
Start without comb
Start with comb
Comb Thread
x30-S
Tandem-CCC
Comb thread 32
Net Pick-up Intarsia
1-course_with_pattern_tension
3-courses_without_transfer
Intarsia Knitting-in
Structure (Intarsia Knitting-in)
Tuck {3} <v>
Float
Stitch {1} <o>
Stitch {3} <o>
Binding with knot (Intarsia knitting-in)
Knot 1
Knot2
Knot3
Knot Split
Feeding (intarsia knitting-in)
Knit-in with cast-off
Knit-in with draw thread
Intarsia Border Processing
Binding (intarsia border processing)
Stitch {3} < v>
Tuck {3} <v>
Tuck {3} <^>
Feeding (intarsia border processing)
Tuck {5} - - v - -
Float {1}
Stitch {1}
MG-Transition coarse-fine
Pick-up Stitch Fine
Pickup coarse Split
Left-aligned/Right-aligned
Widening (k&w)
Default
Split
Stopper
Standard edge open
Closing-Stitch Layers apart
TC-T Standard
TC-T Standard edge open
TC-T Closing-Stitch
Narrowing
1x1-MG structure double jersey
1x1-MG single jersey structure
1x1-MG Jac float
1x1-MG Jac-twill
1x1-MG Jac-net
1x1-MG Jac-stripe
Structure double jersey
Default
TC4-01
2x1 Rib (^vv...vv^)
2x1 Rib (^vv…vv^)
2 Needle Narrowing R/R (v...v)
TC4-02
TC4-03
TC4-04
TC-R Shape Edge
TC-R-V
TC-R Shape Outer Edge without combination transfer
TC-R-V without combination transfer
TC-T-01 2 strokes / traverses
TC-T-02 4 strokes / traverses
TC-T-03 6 strokes / traverses
TC-T-04 8 strokes / traverses
Structure single jersey
L-R separate transfer
L-R combined transfer
TC4
TC-R Shape Edge
TC-R-V
TC-T type 1
TC-T type 2
TC-T Stitch ^ without empty rows
TC-T Stitch v without empty rows
Stitch ^ divided racking
Stitch v divided racking
Jac float
Jac twill
Default
TC4
TC-R Shape Edge
TC-R-V
TC-T
Jac net
Default
TC4
TC-R Shape Edge
TC-R-V
TC-T
Jac stripe
Default
TC4
TC-R Shape Edge
TC-R-V
TC-T
Technical container module (narrow/widen)
Widening
Structure single jersey
without Closing
Stopper
Default
Structure double jersey
TC4
TC-R Shape Edge
TC-T
TC-T <<
TC-T >>
TC-R-V
Default
1x1-MG single jersey structure
Default
1x1-MG Jac float
Jac float
Narrowing (k&w)
Sleeve
Sleeve above
Sleeve above Layers apart
Sleeve underneath
Sleeve underneath Layers apart
Sleeve Rib
Sleeve Rib Layers apart
French Shoulder
Remaining narrowing
Body
Body above
Body above Layers apart
Body underneath
Body underneath Layers apart
k&w Body Rib
Body Rib Layers apart
Shoulder
Neckline
Neckline Rib_L0/L1
Neckline Rib_L0
Neckline Rib_L1
Sleeve TC-T
Sleeve above 2 TC-T
Sleeve above 4 TC-T
Sleeve underneath TC-T
Remaining Narrowing TC-T
Body TC-T
Body underneath 2 TC-T
Body underneath without S0 TC-T
Shoulder
Body underneath 4 TC-T
V-neck TC-T
V-neck above TC-T
Fade-out
Knitting off shoulder gore L1 Do not knit 6 stitches
Knitting off Shoulder gore L1 6 stitches not knitting < all needles
Knitting off shoulder gore 2x2 rib L1 Do not knit 6 stitches
Shape correction
Intarsia Border Processing
Shape correction
Knit-in out (k&w)
Binding with Knot
Knots 1 border
Knots tubular connection
Knot for connection of tubes TC-T
Knots
Feeding
cast-off in front of L0
Cast-off rear L1
Knots for Stripes
Criteria for the selection and the use of the modules
Move docking modules
Limit module
Container module mirroring
Module with limit condition(s)
Jacquard Generators
Float
Stripe
Twill
Net
Net 1x1
Net 1x2
Net 1x3
Net relief
Float without Transfer
Jacquard module
System sequences for 2-color jacquard
1Y for 4-system machine (2-color jacquard)
1Y for 6-system machine (2-color jacquard)
1Y for 2-system machine (2-color jacquard)
2Y for 4-system machine (2-color jacquard)
2Y for 6-system machine (2-color jacquard)
1Y for 3-system machine (2-color jacquard)
1Y for 1-system machine (2-color jacquard)
2Y for 3-system machine (2-color jacquard)
3Y for 6-system machine (2-color jacquard)
System sequences for 3-color jacquard
1Y for 6-system machine (3-color jacquard)
2Y for 6-system machine (3-color jacquard)
1Y for 4-system machine (3-color jacquard)
2Y for 4-system machine (3-color jacquard)
2Y for 2-system machine (3-color jacquard)
1Y for 3-system machine (3-color jacquard)
1Y for 1-system machine (3-color jacquard)
1Y for 2-system machine (3-color jacquard)
System sequences for 4-color jacquard
1Y for 6-system machine (4-color jacquard)
1Y for 6-system machine (4-color jacquard)
1Y for 4-system machine (4-color jacquard)
1Y for 3-system machine (4-color jacquard)
1Y for 3-system machine (4-color jacquard)
1Y for 1-system machine (4-color jacquard)
1Y for 2-system machine (4-color jacquard)
System sequences for 5-color jacquard
1Y for 6-system machine (5-color jacquard)
1Y for 4-system machine (5-color jacquard)
2Y for 4-system machine (5-color jacquard)
1Y for 2-system machine (5-color jacquard)
1Y for 3-system machine (5-color jacquard)
1Y for 1-system machine (5-color jacquard)
System sequences for 6-color jacquard
1Y for 6-system machine (6-color jacquard)
2Y for 4-system machine (6-color jacquard)
1Y for 4-system machine (6-color jacquard)
1Y for 3-system machine (6-color jacquard)
1Y for 2-system machine (6-color jacquard)
1Y for 1-system machine (6-color jacquard)
Local module
Pattern element
Edit Multiple Modules
Generate Modules and Arrangements
Edit module
Generating module in module editor
Generate jacquard module
Generate Modules from Selection
Generate Color Arrangement from Selection
Generate Module Arrangement from Selection
Generate Combination Module
Generate Step Module
Generate Technical Container Module
Generate Container Module Mirror
Generate limit module
Generate module with limit condition(s)
Edit and save modules
Insert modules (Technical Mode)
Drawing with modules
Drawing with combination module
Drawing with step module
Drawing with container module mirroring
Generate jacquard areas in pattern
Row alignment
Meaning of the colors in the Design Mode.
Meaning of the colors in the Technical Mode.
Racking priority (example)
Managing modules
Transparent areas in the module
Use of transparent areas in module (examples)
Positioning of the Binding-off module
Generate Definition Module (FF)
M1plus – Working with patterns without shape
Pattern parameter tables
Stitch length table
No.
Color
NP
PTS
Value
Description
F, U, M, S, G (status columns)
NPS-Table
PNP-Table
Fabric take-down table
Auxiliary Take-down Table
Belt take-down table
Carriage speed table
MSEC Ind
m/s
Cycles
Entry number of cycles
Color
Cycle counter RS
Description
Type
Min
Max
Default
From
to
Behavior
Context menu (Cycles)
Insert new Sintral Cycle
Type
Cycles
Racking Correction Table
Context menu (pattern parameter tables)
Change Color
Insert new entry
Delete entry
Copy
Paste
Reset modified state
Insert new gauge
Do not display gauge
Undo
Zoom presentation in or out
Redo
Save settings
Menu bar (pattern parameter tables)
Toolbar (pattern parameter tables)
Key combinations (pattern parameter tables)
Tables
Edit in pattern
Select area
Echo of the Drawing Tools
Move selection
Drawing with stitch length
Rulers
Import pictures
Load picture and reduce colors
Prepare the Picture in a Photo Editor
Automatic Color Reduction
Manual color reduction
Load SIRIX picture
Generate color jacquard from picture
Replace the color of the back
Generate the structure / intarsia from the picture
Module positioning in Step 4
Generate shape from picture
Image Import
Step 1: Picture Selection
Step 2: Color Selection
Step 3: Jacquard
Step 3: Structure/Intarsia
Step 4: Module Positioning
Dialog boxes (picture import)
Standard settings
Basic Pattern
Change Color
Gore function
Sequence Editor
Sequence List Editor
Order
Modified machine designations for pattern design
Machines with additional beds
Technical view for TC4 and TC-R
Change machine from TC4 or TC-T to TC-R
Change machine from TC-R to TC4 or TC-T
Header of the Sintral function
Yarn Table
Use of RS and counters
Weft Yarn with Weft Yarn Presser Foot for ADF-W and CMS-W
Enclose the Weft Yarn by Stitch (ADF)
Enclose the Weft Yarn by Transfer (ADF)
Enclose the Weft Yarn by Stitch (CMS-W, Qs)
Enclose the Weft Yarn by Transfer (CMS-W, Qs)
Enclose the Weft Yarn by Stitch (CMS-W, Qw)
Enclose the Weft Yarn by Transfer (CMS-W, Qw)
Correction of Presser Feet (ESCI) on W Machines
Setup2 – "Presser Foot" tab
Cam Conversions
Holding-deep by tuck function
Divided stitch cam
Fully fashion - working with fully fashion fabrics
Generate shape manually
Regulation of the width with cycles
Stitch densities for k&w
ShapeSizer (FF)
File selection (ShapeSizer FF)
Stitch density (ShapeSizer FF)
Measure table (ShapeSizer FF)
Print the measure table (ShapeSizer)
Stepping (ShapeSizer FF)
Generate shapes (ShapeSizer FF)
Shape Editor
General shape data
Elements
Section above the tables
Menu bar (Shape editor)
File
New
Open .shv Shape [mm] ...
Open .shp Shape [Stitches] ...
Import (Shape editor)
.dxf shape... (Import)
.shpx shape... (Import)
Export (Shape editor)
.shpx shape... (Shape editor)
.shp/.shv in M1 format (Shape editor)
Default
k&w Body
k&w sleeve
k&w neck opening
Stitches => Steps
Steps => Stitches
Save
Save As...
Convert and Save As...
DXF-Toolkit...
Print preview
Print...
List files last opened
Quit
View
Display Graphic
Status Bar
Line Entry
+: to the right, -: to the left:
+: Widen, -: Narrow:
For Shape Definitions of Type A
First widen then knit
First knit then widen
Tables
Left line
Right lines
Left markings
Right markings
Question mark (?)
Help Topics
About Shape Editor...
Toolbars (Shape editor)
Standard (toolbar Shape Editor)
Elements (toolbar Shape Editor)
Lines (toolbar Shape Editor)
Elements (toolbar Shape Editor)
Select and copy shape elements
Dialog boxes (Shape editor)
Left/right lines
Edit the line table
Left/right markings
Manifold marking points
Lines Editor
Line function
General tab
Narrowing/Narrowing M tab
Widening tab
Binding-off tab
Fade-out tab
Start tab
End tab
Connections tab
Marking point function
DXF-Toolkit
Menu bar (DXF-Toolkit)
File
New
Open
Save
Save as
Save and load into Shape Editor
Save as bitmap...
File list
Exit
Edit
Undo
Redo
Align
Rotate
Scale
Mirror
Halve
Convert
View
Toolbar
Status Bar
Extra
Display Layer
Display Pieces
Display Info
Display Lines
Display Macros
Question mark (?)
Contents
Info about DXF-Toolkit
Toolbar (DXF-Toolkit)
Key combination (DXF-Toolkit)
Dialog boxes (DXF-Toolkit)
Save DXF file as
Save as bitmap
Align
Rotate
Scale
Mirror
To cut into halves
Display Layers
Show Pieces
Show Lines
Show Macros
Define Measures in the DXF-Toolkit
Generate a petinet pattern without empty rows
Generate a double jersey racking pattern with shape
Knitting with racked beds
Knitting in racking for the 3x3 cable stitch
Align pattern areas
Knots at the Shape Edge with a French Shoulder
Stitch length on shape edge
k&w - Working with knit and wear
Edit shape edge
Select shape rows
ShapeSizer (k&w)
File selection (ShapeSizer k&w)
Stitch density (ShapeSizer k&w)
Measure table (ShapeSizer k&w)
Print measure table (ShapeSizer k&w)
Stepping (ShapeSizer k&w)
Fair Isle stepping (ShapeSizer k&w)
Fair Isle narrowings (ShapeSizer k&w)
Generate shapes (ShapeSizer k&w)
Open and position k&w shapes (ShapeSizer k&w)
ShapeWizard
Menu bar (Shapewizard)
File
New
Open...
Save
Save As...
List files last opened
Display log file...
Quit
View
Toolbar
Display Shapes
Zoom +1
Zoom -1
Normal View (1:1)
Update k&w Arrangements
Question mark (?)
Help Topics
About ShapeWizard
Toolbar (Shapewizard)
Dialog boxes (Shapewizard)
Shape Display
Exchange k&w Arrangement
Docking points
k&w Arrangement Editor
Context menu (k&w Arrangement Editor)
k&w Arrangement Attributes
Generate Color Arrangement
Set docking points
Additional rows in the k&w Arrangement (examples)
Width adaptation in the k&w Arrangement Editor
From the k&w Arrangement to the CA
Use of RS and counters
Automatic steps of processing
Expand design pattern
Technical Processing
Technical Assistant
Adjustment of stitch length
Rules
Generate new rules
Conditions and actions
Technical Assistant Info: <pattern name>
Technical assistant (final message)
Solution Table
Stepwise Technical Processing
Meaning of value 1
Evaluation of Value 1
Meaning of value 2
Sintral Check (program)
Menu Bar (Sintral Check)
Toolbar (Sintral Check)
Dialog boxes (Sintral Check)
Exit SINTRAL CHECK
Programm Configuration
Display Areas PA-WKT
Set counter
Cycles, piece counters, set fabric edges
Define Material
Define Standard
About Sintral Check
Simulation...
Overview
WKT
PA Front / PA Rear / PAI / PM Front / PM Rear
Counter output
Yarn Carriers
Yarn Carrier Positions
Graphic view
Jacquard output 1 - 8
Mode of display
Data exchange
Data export
Data import
Import modules
Import Sintral check
Import setup data
Import Shape
Line 1 in the Sintral
Extract jac/sin/set-files...
Knitting time comparison
Menu bar (Knitting time comparison)
Output of the knitting time comparison
Split pattern (splitsintral.exe)
Setup Data
Background
Comparing Setup1 to Setup2
Using Setup1 or Setup2
Loading knitting program
Setup1 Editor
NP 1..50/51..100 tab
NPS 1..50/51..100 tab
PNP 1..50/51..100 tab
WMF tab
YD tab
KI/K<;<; tab
MSEC tab
Ua/Ub tab
Yarn Length Control
Measuring wheels (tab)
Enter the Stitch Length (section)
Setup2 Editor
Overview of the Setup2 Editor on the CMS
Calling up the Setup2 Editor on the machine
Helpers for Input
Adding a row
Switching on or off the table tools
Table Tools
File tools
Apply a change to further patterns
Activate/deactivate the display of the active "Don't Care" values
Setup2 Editor on the M1plus
Toolbar
Menu Bar
Adding a row
Special characters in Setup2 comments
Take-down
WMF (tab)
W+F (tab)
WM% WMK% (tab)
WBF (tab) - Belt take-down
Yarn Carrier
YD / YDI (tab)
YC / YCI (tab)
YC / YCI (tab)
Y:Oa-b (tab)
Y:Ua-b / Y:Ncc (tab)
Y:Ncc (tab)
YPI (tab)
Width (tab)
Stitch Length
NP (tab)
PNP (tab)
NPS (tab)
NPR (tab)
NPGK (tab)
Carriage Speed
Cycle Counters
Yarn length
Basic Settings
Correction Values
Yarn Data
NP (Knitting Mode)
Feed Wheels
Y -> Group (tab)
SFOINIT (tab)
SFOI (tab)
Racking
Presser Foot
Miscellaneous
Data Mode and File Mode
Sintral Editor (UltraEdit-32)
Settings in the Sintral Editor (UltraEdit-32)
Compare sin, jac, set files
Sintral editor
Menu bar (Sintral Editor TC)
Toolbar (Sintral Editor TC)
Key combinations (Sintral editor TC)
Invalid Characters in Sintral
Load the machine operating system from the M1plus
Load the pattern files from the M1plus
Adjusting the Stitch Cams with Programs from the M1plus
Yarn List to Adjust Stitch Cams
Adjusting Stitch Cams CMS OKC with Setup2
STOLL Knit Memory Card (KMC)
Menu bar (KMC)
KMC
Open Container
Open KMC
New Container
Close
Format
Reorganize
Copy to Container
Copy to KMC
Print
Print preview
Printer Set-Up
Options
Font size
File list
Quit
Edit
Copy File(s)
Paste File(s)
Delete Buffer
Save File(s) in Container
Save File(s) from KMC As
Rename file(s)
Open/modify file(s)
Create System
Image format conversion from Stoll-NT to Stoll
Delete File(s)
Delete All Files
Select All Files
Deselect All Files
Special
About KMC
Update Display
Restoration of deleted files
Prompt When Deleting Files?
View
Toolbar
Status Bar
Display All?
Windows
New Window
Cascade
Tile Horizontally
Arrange Symbols
List of the open windows
Question mark (?)
About
Help Topics
Toolbars (KMC)
Key combinations (KMC)
Context menu (KMC)
Dialog boxes (KMC)
Format KMC
Selection of KMC storage
Options
Selection of container file
Copy to KMC
Generate T11 system
Specify attributes of pattern file
SELAN
Machine Explorer
Menu bar (machine explorer)
Quit
Copy
Paste
Delete
Select All
Default
Draw
Call around
Status Bar
Online-Offline Symbols
Layer Rectangular Symbols
Select Rectangular Symbols
Draw Vertical Rectangular Symbols
Draw Horizontal Rectangular Symbols
Update
Options...
About Machine Explorer...
Toolbars (Machine Explorer)
Default
Call around
Draw
Context menu (Stoll machines)
Large Icons
Small Icons
List
Details
By Name
Sort Automatically
Create My Machine
Properties
Context menu (My machines)
Details
By Online ID
Rename...
Load Data to Machine
Save Data From Machine
Online
Online readiness
Online Tools...
Group Online Call-around...
Define Online as Default
Properties
Set time
Dialog boxes (machine explorer)
Set up new my machine
Properties of: <machine name (Stoll machine)>
General tab
System functions tab
Presser Foot tab
Load Data to Machine
Save Data From Machine (ST211 - ST468)
Save machine data (OKC)
Extra Functions
Define call-around group
Properties of: <machine name (my machine)>
General tab
System functions tab
Options tab
Tandem operation tab
Online parameters tab
Machine data tab
Data security tab
Presser Foot tab
Options (machine explorer)
Connect to other database (Machine Explorer)
Feed wheels
EFS 820/920 Communication with CMS
General information on EFS programming
Sintral command DEVOUT
Use of the DEVOUT command with the M1plus
Control via Adapter "Switchable outputs"
Installing and Using SINTRAL Crypto Tool
The SINTRAL Crypto Tool
The Encrypted Pattern
How to change the language
How to generate and manage the crypto tasks
Encryption Profile
Overview to EVP
On the Machine
EVP and the behavior of the machine
Extended Value Package "PPS Connector" (Production Planning System)
In the STOLL WEBSHOP
How to install the SINTRAL Crypto Tool
How to encrypt patterns
How to generate machine keys on the machine
How to invalidate a machine key
M1plus Handling+Programming
Getting Started with M1plus
Adapt the M1plus user interface
Keypad
Structure Pattern
Create Pattern
Draw the structure
Draw color
Expand pattern
Complete, save and knit the pattern
Data Structure and Storage Media
File system
Setup2
Modify the pattern parameters of the structured pattern
The Control Columns
Icons of the Control Columns
Change the default settings for the stitch length
Working with the stitch length table
Change the default settings for the fabric take-down
Working with the Fabric Take-down Table
Set the specifications for the auxiliary take-down
Working with the Auxiliary Take-down Table
Change the default settings of the carriage speed
Working with the Carriage Speed Table
Make settings for racking corrections
Working with the Racking Correction Table
Modifying the 'Global Pattern Parameters' File
Structure pattern with changed transfer settings
The Transfer tab of the Configuration Dialog Box
Complete the Pattern
Use of yarn colors
Create Pattern
Draw structure with yarn colors
Complete the Pattern
Use of yarn carrier colors
Create Pattern
Draw structure with yarn carrier colors
Complete the Pattern
Possibilities in the Yarn field allocation dialog box
Yarn field table in the Yarn Field Allocation dialog box
Selecting in the Yarn Field Allocation dialog box
Change the Direction of Knitting-in and out
Change the Module for Knitting-in and Knitting-out:
Change Binding or Knot at Start or End:
Apply the Yarn Carrier Specifications for Several Yarn Fields:
Group yarn fields
Add a New Yarn Carrier:
Generate New Yarn Field
PTS - Different Stitch Lengths in a Single Technical Row
Create and draw a pattern
Change stitch lengths
Complete the Pattern
Power Tension Setting - PTS
Change Machine Type / Replace Start
Complete the Pattern
Colored jacquards with different reverse sides
Create Pattern
Draw color jacquard with different reverse sides
Modifications within Color Jacquard Areas
Complete the Pattern
Structure with color jacquard
Create Pattern
Drawing the Structure and the Jacquard Bordering
Generate a Module Arrangement
Complete the Pattern
Pattern elements, Modules and Co.
Pattern element
Modules
Pattern Rows in the Module
Behavior when Inserting Pattern Elements or Modules
Length control with cycles
Create and draw a pattern
Define cycles for length control
Length adjustment with switchable cycles
Length adjustment with multiple switchable cycles
Settings for Cycles
Complete the Pattern
Regulation of the width with cycles
Define cycles for different widths (Sizes)
Combine width and length control
Combine cycles for length and width:
Intarsia Pattern
Global settings in configuration:
Create and expand intarsia pattern
Pattern related settings in the configuration
Yarn field table in the Yarn Field Allocation dialog box
Selecting in the Yarn Field Allocation dialog box
Pattern related settings in the Yarn Field Allocation dialog box
Influence the Knitting-in Direction of a Yarn Carrier
Change the Starting Direction of a Yarn Field
Change the Settings for Knitting-in and Knitting-out
Change Binding and Knot at the Start or End of a Yarn Field
Change the Settings for the Border Processing Feeding or Reducing
Set the Allowed Stepping for Border Processing
Further Options
Pattern Related Settings in the Control Columns
Complete the Pattern
Intarsia with Jacquard Back
Create Intarsia Pattern
Insert Jacquard Back and Make Further Settings
Border Processing Jacquard / Net-end
Complete the Pattern
Argyle Drawing Tool
Intarsia with Yarn Bridges
Create Intarsia Pattern
Possible settings in the Yarn Field Allocation dialog box
Complete the Pattern
Evaluation of Braking Values for Intarsia Yarn Carriers
Correct Intarsia Yarn Carriers with YCI
Combine Yarn Carriers and Set the Order
Configuration dialog: Combine the yarn carriers automatically
Yarn Field Allocation dialog box: Combine all the yarn carriers automatically
Yarn Field Allocation dialog box: Combine selected yarn carriers
Yarn Field Allocation dialog box: Combine Yarn Carriers and Set the Order:
The Module Explorers of the M1plus
The Module Explorer of Database
The Module Explorer of Pattern
Multi Gauge
Create a pattern with multi gauge modules
Complete the Pattern
M1plus Machine Explorer
Petinet and Split Technique with Empty Rows
Create and draw a pattern
Complete the Pattern
Multi-Piece Knitting
Multi-piece knitting on machines with comb
Multi-piece knitting on machines without comb
Multi-piece knitting with CMS 822
Module Explorer of Pattern: Modify the Inserted Start
Module Explorer of Database: Modify the Stoll start
Copy and Rename a Stoll Start:
Rename and allocate the modules and elements:
Modify the Knitting Procedure of the Start
M1plus FullyFashion+Spezial
Generate cuts and shapes
Fully Fashion-Pattern: Sleeve
Rules for a sleeve in SJ knitting mode
Generate pattern with shape
Further settings for Fully Fashion
Complete the pattern
Modify a Shape in the Symbol View [Basic].
Modify the height and the width of a shape in the Symbol View [Basic].
Complete the pattern
Neck Variants
Fully Fashion-Pattern: Structure with V-neck
Rules for a front in SJ knitting mode
Create a pattern without shape and open the shape
Complete the pattern
Changes in the symbol view
Use of a different number of yarn carriers with cut-out
Settings for the Yarn Carriers
Shape Editor
Change shape attributes
Default Attributes
Edit the existing shape in the shv format
Edit the existing shape in the shp format
Generate a new shape in the shv format
Generate a new shape in the shp format
Edit New Shape
Fully Fashion-Pattern: Shape with round neck and binding-off
Rules for a front with binding off for the knitting mode SJ
Change the shape in the M1plus Shape Editor
Generate pattern with shape
Complete the pattern
Fully Fashion-Pattern: Shoulder Gore
Create the shape in the M1plus Shape Editor
Create a pattern without shape and open the shape
Complete the pattern
Possibilities to Modify Protection Rows
Fully Fashion-Pattern: Jacquard
Rules for a shape with Jacquard knitting mode
Create the shape in the M1plus Shape Editor
Generate pattern without shape and position shape
Complete the pattern
Fully Fashion-Pattern: Knitting mode double jersey
Rules for double jersey fabrics with shape
Create the shape in the M1plus Shape Editor
Generate pattern with shape
Create Intarsia Motif
Complete the pattern
Fully Fashion-Pattern: Waistcoat front with tubular border
Create the shape in the M1plus Shape Editor
Fully Fashion: Variants of generating shapes.
Generate Pattern without Shape
Generate and position the shape
Complete the pattern
Fully Fashion-Pattern: Tank top with button loops
Create the shape in the M1plus Shape Editor
Create the pattern and position the shape
Complete the pattern
ShapeSizer
ShapeSizer: Specify the stitch ratio
ShapeSizer: Generate sizes - Grading
ShapeSizer: Specify steppings and binding off
ShapeSizer: Saving the size table
ShapeSizer: Make settings and close dialog box.
Working with modules
Working with modules: Module without stitch rows
Working with modules: Modules with transfer actions only
Working with modules: Combination module with cycles
Working with modules: Module with docking points
Working with modules: The step module
Working with modules: Technical container module
Fully Fashion-Pattern: French Shoulder
Create the shape in the M1plus Shape Editor
Generate a Technical Container Module for Narrowing
Options of allocating modules in the Shape Editor
Generate pattern with shape
Complete the pattern
Working with modules: Module with limit conditions and limit module
Reference row
Color Arrangement: Border Processing Outside the Shape
Pattern and Color Arrangement with the # symbol
Complete the pattern
Color Arrangement for CMS 330/530 W: Weft Yarn with Weft Yarn Presser Feet in Different Structures
Generate Pattern and Color Arrangements
Complete the Pattern
Color Arrangement for CMS 330/530 W: Weft yarn with weft yarn presser foot
Generate pattern and Color Arrangement
Complete the Pattern
Color Arrangement for CMS 330/530 W: Selective weft yarn inlay with weft yarn presser foot
Generate pattern without shape
Draw basic pattern with the area for the weft yarn
Generate Color Arrangement
Two variants for knitting in or out the yarn carriers of the area with selective weft yarn inlay
Border Processing of the Area with Selective Weft Yarn
Pattern Examples for Border Processing
Complete the Pattern
Further Topics - - M1plus Fully Fashion - Special
Module Properties
Module Properties: Description
Module Properties: Cycles
Module Properties: Gauge
Module Properties: Technique
Module Properties: JAC net type
Sintral Functions
Generate or modify a Sintral function
Use Sintral functions
Parameters of the Sintral functions
Invalid characters in Sintral
Comb activity with RS17
Create Pattern
Settings for the use of the comb
Complete the Pattern
Function sequence Comb with RS17
Working with Sequences
Split up the Knitting Program
Color Arrangement: Shirt pocket with step module for binding-off
Pattern and Color Arrangement for shirt pocket with two yarn carriers
Step module: Binding-off for shirt pocket
Complete the pattern
Fully Fashion-Pattern: V-neck with Tubular Trimming
Generate a Module for Fade-out
Generate the Shape and Allocate the Shape attributes
Further Possibility of Narrowing Attributes
Generate pattern with shape
Complete the pattern
Jacquard Module of your own
3-color Jacquard with Transfer
Generate Jacquard Modules of Your Own
Create Pattern
Complete the pattern
2-color Relief Jacquard with 1x1 Net Back
Generate Jacquard Module
Create Pattern
Complete the pattern
Fully Fashion-Pattern: 2X2 Rib -V- with Stoll module
Rules for a Shape in 2x2 Rib Knitting Mode
Create the shape in the M1plus Shape Editor
Create a pattern without shape and open the shape
Complete the pattern
Fully Fashion-Pattern: 2X2 Rib -V- with own module
Generate Own Fade-out Modules
Create the shape in the M1plus Shape Editor
Create a pattern without shape and open the shape
Possibilities with a narrowing edge with the stitches above
Complete the pattern
Fully Fashion-Pattern: 2x1 Rib
Rules for a Shape in 2x1 Knitting Mode
Create the Shape in the M1plus Shape Editor
Create a pattern without shape and open the shape
Complete the pattern
Fully Fashion-Pattern: Variant of the 2x1 Rib
Rules for a Shape in 2x1 Knitting Mode - Variant
Create the Shape in the M1plus Shape Editor
Create a Pattern without Shape and Open the shape - Variant
Complete the pattern
Fully Fashion-Pattern: Overlapping Tubular Trimming
Generate a Fade-out Module for the Tubular Trimming
Create the shape in the M1plus Shape Editor
Create a pattern without shape and open the shape
Generate Color Arrangements
Complete the pattern
Fully Fashion-Pattern: Round neck with knit on Collar
Create the shape in the M1plus Shape Editor
Create the pattern and load the shape
Generate Color Arrangements
Edit the pattern manually
Correct a Pattern with cut-out Shape
Correct the expanded pattern
Complete the pattern
Fully Fashion-Pattern: Knitting in Racking
Behavior of the Jacquard selection in the rear needle bed
Create and draw a pattern
Create the shape in the M1plus Shape Editor and load it
Complete the pattern
Color Arrangement: Intarsia Binding with Float
Create intarsia pattern
Generate Color Arrangement for Intarsia binding
Complete the pattern
Skirt with Plissee
Version 1 Skirt with plissee
Generate length cycles
Complete the pattern
Version 2: Skirt with plissee
Generate motif and length cycles
Complete the pattern
Version 3: Skirt with plissee
Further possibility: Knitting-in elastic yarn
Complete the pattern
Fully Fashion-Pattern: Knitting mode Double Jersey with 1x1 Selvedge
Rules for double jersey fabrics with 1x1 selvedge
Fade-out and narrowing modules for 1x1 selvedge
Creating shape
Allocate modules for the selvedge
Generate pattern without shape and position shape
Complete the Pattern
Fully Fashion-Pattern: Narrowing with Additional Beds
Rules for the creation of double jersey fabrics with additional beds
Create the shape in the M1plus Shape Editor
Create the pattern and position the shape
Complete the Pattern
Intarsia pattern: Own Modules for Binding / Knots
Generate own binding/ knots modules
Stoll-devoré knit® with Fully Fashion
System default and settings for devoré
Generate motif and shape
Generate a fade-out module
Apply shape and insert Jacquard
Possible jacquard selection with 2-colored motifs (devoré knit / plush)
Complete the Pattern
Stoll-devoré knit® - knitting technique with Intarsia
System default and settings for devoré
Generate devoré motif with intarsia:
Generate Color Arrangement for Devoré- Intarsia
Settings in the Yarn Field Allocation dialog box
Complete the Pattern
Stoll-devoré knit® with twill and plush
System default and settings for devoré and plush
Generate devoré motif with plush
Possible jacquard selection with 3-colored motifs (devoré knit / plush)
Complete the Pattern
Fully Fashion-Pattern: Fair Isle Narrowing with Float Jacquard
Fair Isle Narrowing
Create the shape in the M1plus Shape Editor
Create the pattern and load the shape
Draw the motif
Complete the Pattern
Fully Fashion: Fair Isle Narrowing with Structure
Create a pattern and draw the motif
Draw-in and cut out narrowing steps
Create and load shape
Correct narrowings
Complete the Pattern
M1plus Knit and Wear
Stoll-knit and wear® on the M1plus Pattern Workstation
Steps to knit and wear Pattern
General information on Stoll knit and wear® technique
k&w shape: Managing and basic rules for generating
Possibilities for pattern generation with k&w
Overview of the knitting modes and shapes
k&w patterns with shapes from the ShapeSizer
ShapeSizer: Raglan with neck gore
Generate Pattern without Shape
Create the shape in the ShapeSizer and open it in the pattern
Position and cut-out the shape and expand the pattern
Complete the pattern
ShapeSizer: Saddle shoulder with neck gore
Generate Pattern without Shape
Create the shape in the ShapeSizer and open it in the pattern
Position and cut-out the shape and expand the pattern
Complete the pattern
ShapeSizer: Inserted sleeve with shoulder gore and V-neck
Generate Pattern without Shape
Create the shape in the ShapeSizer and open it in the pattern
Position and cut-out the shape and expand the pattern
Complete the pattern
ShapeSizer: Raglan with Fair Isle narrowing technique and neck gore
Generate Pattern without Shape
Create the shape in the ShapeSizer and open it in the pattern
Position and cut-out the shape and expand the pattern
Complete the pattern
Edit markings
Narrowing, widening and binding-off types
Use different narrowing types
Multi-step narrowing / Doubling
Use different widening types
Use different binding-off types
Generate own k&w modules
Allocate and display knitting layers / column layers
Mirroring module
Generate and edit mirroring modules
Help functions for the pattern design generation
Possibilities in the Mirror k&w Design to Knitting Layer L1 dialog box
Module Explorer of Database with Stoll knit and wear®
Settings in Configuration k&w dialog box
Knitting Zones k&w tab
Transfer k&w tab
Intarsia k&w and Intarsia all needles TC-T k&w tab
Comb, Clamping tab
Additional settings k&w tab
Generate k&w pattern with the Shapewizard
Shapewizard: Combine shape elements
Shapewizard: Raglan with neck gore
Generate Pattern without Shape
Rules for generating a shape: raglan
Create shape: Raglan with neck gore
Shapewizard: Load Shape Elements
Shapewizard: Determine docking points and k&w Arrangements
Open shape
Position and cut-out the shape and expand the pattern
Complete the pattern
Shapewizard: Saddle shoulder with 2x2 rib
Generate Pattern without Shape
Rules for generating a shape: saddle shoulder
Create shape: Saddle shoulder with 2x2 rib
Generate your own container module mirroring for fading out
Shapewizard: Load Shape Elements
Shapewizard: Determine docking points and k&w Arrangements
Open shape
Position and cut-out the shape and expand the pattern
Complete the pattern
Shapewizard: Cardigan with inserted sleeve
Generate Pattern without Shape
Rules for generating a shape: Inserted sleeve
Create shape: Cardigan with inserted sleeve
Shapewizard: Load Shape Elements
Shapewizard: Determine docking points and k&w Arrangements
Lay shape on
Position and cut-out the shape and expand the pattern
Complete the pattern
Working with the Shape View
Presentation in the Shape View
Shape tools in the shape view
Edit shape in the shape view.
Shapewizard: Waistcoat with V-neck
Generate Pattern without Shape
Rules for generating a shape: Waistcoat with V-neck
Create shape: Waistcoat with V-neck
Shapewizard: Load Shape Elements
Shapewizard: Determine k&w Arrangements
Open shape
Position and cut-out the shape and expand the pattern
Complete the pattern
Shapewizard: Short sleeve with V-neck
Generate Pattern without Shape
Rules for generating a shape: Inserted short sleeve
Create shape: Short sleeve with V-neck
Shapewizard: Load Shape Elements
Shapewizard: Determine docking points and k&w Arrangements
Draw structure and generate fade-out module
Open shape
Position and cut-out the shape and expand the pattern
Complete the pattern
Short sleeve/short body
Shapewizard: short body with inserted and linked sleeve
Generate Pattern without Shape
Rules for generating a shape: Short body
Create shape: short body with inserted and linked sleeve
Shapewizard: Load Shape Elements
Shapewizard: Determine docking points and k&w Arrangements
Open shape
Position and cut-out the shape and expand the pattern
Complete the pattern
Shapewizard: F-Shoulder Sleeve
Generate Pattern without Shape
Rules for generating a shape: F-Shoulder Sleeve
Create shape: F-Shoulder Sleeve
Shapewizard: Load Shape Elements
Shapewizard: Determine docking points and k&w Arrangements
Open shape
Position and cut-out the shape and expand the pattern
Complete the pattern
Shapewizard: slipover
Generate Pattern without Shape
Rules for generating a shape: slipover
Create shape: slipover
Shapewizard: Load Shape Elements
Shapewizard: Determine k&w Arrangements
Open shape
Position and cut-out the shape and expand the pattern
Complete the pattern
Shapewizard: Saddle shoulder with V-neck and narrowed collar
Generate Pattern without Shape
Rules for generating a shape: Saddle shoulder with V-neck and collar
Create shape: Saddle shoulder with V-neck and narrowed collar
Shapewizard: Load Shape Elements
Shapewizard: Determine docking points and k&w Arrangements
Open shape
Position and cut-out the shape and expand the pattern
Complete the pattern
Shapewizard: Raglan with neck gore
Generate Pattern without Shape
Rules for generating a shape: raglan
Create shape: Raglan with neck gore
Shapewizard: Load Shape Elements
Shapewizard: Determine docking points and k&w Arrangements
Position and cut-out the shape and expand the pattern
Edit markings
Complete the pattern
Rules for knit and wear® shapes
k&w starts in the overview
Combine and position the individual shapes to form a k&w shape:
Overview of the k&w Arrangements in the Module Explorer of Database
k&w pattern with manual allocation of k&w Arrangements
Shape view: Raglan with V-neck
Generate Pattern without Shape
Rules for generating a shape: raglan
Create shape: Raglan with V-neck and collar
Load and position the shape elements
Draw-in the k&w Arrangements manually: Raglan with V-neck
Cut out the shape and complete the pattern
Shape view: Inserted sleeve with V-neck
Generate Pattern without Shape
Rules for generating a shape: Inserted sleeve
Create shape: Inserted sleeve with V-neck
Load and position the shape elements
Draw-in the k&w Arrangements manually: Inserted sleeve with V-neck
Cut out the shape and complete the pattern
Shape view: Saddle shoulder with V-neck
Generate Pattern without Shape
Rules for generating a shape: Saddle shoulder with V-neck
Create shape: Saddle shoulder with V-neck
Load and position the shape elements
Draw-in the k&w Arrangement manually: Saddle shoulder with V-neck
Cut out the shape and complete the pattern
Shape view: Waistcoat with V-neck
Generate Pattern without Shape
Rules for generating a shape: Waistcoat with V-neck
Create shape: Waistcoat with V-neck
Load and position the shape elements
Draw-in the k&w Arrangement manually: Waistcoat with V-neck
Cut out the shape and complete the pattern
k&w Arrangement Editor
Knitting Rows and Additional Rows in the k&w Arrangement Editor
Knit
Narrowing
Widening
Width Adjustment
Yarn Carrier May Not Change the Layer
Knit off Gore
Insert Linking-Off Markings on Previous Shape Row
Delete Knitting from Previous Knitting Cycle
Connection of tubes
Knots connection of tubes
Cycles in the k&w Arrangement
Define attributes in the k&w Arrangement Editor
Color Arrangement Editor for knit and wear
Möglichkeiten zum Erstellen von Color Arrangements
k&w-Muster mit Color Arrangements
Shapewizard: Raglan with neck gore
Generate Pattern without Shape
Create shape: Raglan with neck gore
Shapewizard: Load shape elements
Shapewizard: Docking points for raglan
Lay on k&w shape and position it
Generate Color Arrangements based on k&w Arrangements
Cut out k&w Shape
Space the Suspending Rows Newly
Draw in a Structure after Cutting out
Generate a Module Arrangement
Complete the pattern
Shapewizard: Raglan with intarsia
Generate Pattern without Shape
Create shape: Raglan with neck gore
Shapewizard: Load Shape Elements
Shapewizard: Determine docking points and k&w Arrangements
Open, position shape and draw-in intarsia motif
Generate Color Arrangement
Complete the pattern
Shapewizard: Raglan with intarsia
Generate Pattern without Shape
Create shape: Raglan with neck gore
Shapewizard: Load Shape Elements
Shapewizard: Determine docking points and k&w Arrangements
Open, position shape and draw-in intarsia motif
Color Arrangements im Modul-Explorer Datenbank erstellen
Complete the pattern
Shapewizard: Raglan with Intarsia in the Sleeve
Generate Pattern without Shape
Create shape: Raglan with neck gore
Shapewizard: Load shape elements
Shapewizard: Determine docking points and k&w Arrangements
Lay-on and position the shape and draw-in the motif
Modify lokal k&w Arrangements
Calculate Color Arrangements
Cut-out shape
Complete the pattern
Shapewizard: Raglan with Intarsia in the Sleeve
Generate Pattern without Shape
Create shape: Raglan with neck gore
Shapewizard: Load shape elements
Shapewizard: Determine docking points and k&w Arrangements
Lay-on and position the shape and draw-in the motif
Modify lokal k&w Arrangements
Calculate Color Arrangements
Cut-out shape
Complete the pattern
Shapewizard: Saddle Shoulder with Pockets
Generate Pattern without Shape
Create shape: Saddle Shoulder with Pockets
Modify the Stoll k&w Arrangement
Shapewizard: Load Shape Elements
Shapewizard: Determine docking points and k&w Arrangements
Load and position the shape and draw-in the pockets
Calculate Color Arrangements
Complete the pattern
Weitere k&w-Muster
Shapewizard: Hose
Muster ohne Form erstellen
Form erstellen: Hose
Shapewizard: Schnittelemente laden
Shapewizard: Verbindungspunkte und k&w Arrangements ermitteln
Form öffnen
Form positionieren, ausschneiden und Muster expandieren
Form positionieren und anwenden: Hose
Form korrigieren: Hose
TC-T: Narrowing, widening and binding-off types
TC-T: Narrowing types
TC-T: Widening types
TC-T: Binding-off types
M1plus k&w - Stamping out
Stoll Database of Pattern
Rules for Stamping-out
Required for Stamping-out with Special Techniques
Stamping out: Raglan with Different Gorings
Creating shape
Generate Pattern without Shape
Loading and Positioning the Shapes
Adjustments in the Symbol view [basic]
Draw-in gore in the shape element
Generate and insert Color Arrangements
Cut out the shape and complete the pattern
Shapewizard: Raglan with neck gore
Generate Pattern without Shape
Rules for generating a shape: raglan
Create shape: Raglan with neck gore
Shapewizard: Load Shape Elements
Shapewizard: Determine docking points and k&w Arrangements
Open shape
Position and cut-out the shape and expand the pattern
Complete the pattern
Stamping out: Sweater with Structure Knitted Across the Grain
Creating shape
Generate Pattern without Shape
Loading and Positioning the Shape Parts
Editing in the Symbol View [Basic] Step by Step
Generate and insert Color Arrangements
Cut out the shape and complete the pattern
Stamping out: Kid Sweater
Creating shape
Generate Pattern without Shape
Loading and Positioning the Shape Parts
Editing in the Symbol View [Basic] Step by Step
Generate and insert Color Arrangements
Cut-out Shape and Complete the Pattern
k&w Training Documents
k&w File Managing and Basic Rules of Generating
ShapeWizard and Shape Display
Generate raglan with the ShapeWizard
Raglan with collar and neck gore
Basic rule: Raglan with collar and neck gore
Step 1: Creating shape
Step 2: Loading and Adjusting Shapes in the ShapeWizard
Step 3: Set docking points
Step 4: Generate k&w file
Step 5: Create basic k&w pattern
Step 6: Open and Position Shape
Step 7: Cut
Step 8: Expanding and completing
Raglan with V-neck
Basic rule: Raglan with V-neck
Step 1: Creating shape
Step 2: Loading and Adjusting Shapes in the ShapeWizard
Step 3: Set docking points
Step 4: Generate k&w file
Step 5: Create basic k&w pattern
Step 6: Open and Position Shape
Step 7: Cut
Step 8: Expanding and completing
Raglan cardigan with collar and neck gore
Basic rule: Raglan cardigan with collar and neck gore
Step 1: Creating shape
Step 2: Loading and Adjusting Shapes in the ShapeWizard
Step 3: Set docking points
Step 4: Generate k&w file
Step 5: Create basic k&w pattern
Step 6: Open and Position Shape
Step 7: Cut
Step 8: Expanding and completing
Tailored raglan with collar and neck gore L0/L1
Basic rule: Tailored raglan with collar and neck gore L0/L1
Step 1: Creating shape
Step 2: Loading and Adjusting Shapes in the ShapeWizard
Step 3: Set docking points
Step 4: Generate k&w file
Step 5: Create basic k&w pattern
Step 6: Open and Position Shape
Step 7: Cut
Step 8: Expanding and completing
Shape elements
Shape elements in the raglan
Generate saddle shoulder with the ShapeWizard
Saddle shoulder (3:1:3) with collar and neck gore
Basic rule: Saddle shoulder (3:1:3) with collar and neck gore
Step 1: Creating shape
Step 2: Loading and Adjusting Shapes in the ShapeWizard
Step 3: Set docking points
Step 4: Generate k&w file
Step 5: Create basic k&w pattern
Step 6: Open and Position Shape
Step 7: Cut
Step 8: Expanding and completing
Saddle shoulder (2:1:2) with collar and neck gore
Basic rule: Saddle shoulder (2:1:2) with collar and neck gore
Step 1: Creating shape
Step 2: Loading and Adjusting Shapes in the ShapeWizard
Step 3: Set docking points
Step 4: Generate k&w file
Step 5: Create basic k&w pattern
Step 6: Open and Position Shape
Step 7: Cut
Step 8: Expanding and completing
Saddle shoulder (2:1:2) with crew neck
Basic rule: Saddle shoulder (2:1:2) with crew neck
Step 1: Creating shape
Step 2: Loading and Adjusting Shapes in the ShapeWizard
Step 3: Set docking points
Step 4: Generate k&w file
Step 5: Create basic k&w pattern
Step 6: Open and Position Shape
Step 7: Cut
Step 8: Expanding and completing
Length compensation body
Generate set-in sleeve with the ShapeWizard
Set-in sleeve with collar and neck gore
Basic rule: Set-in sleeve with collar and neck gore
Step 1: Creating shape
Step 2: Loading and Adjusting Shapes in the ShapeWizard
Step 3: Set docking points
Step 4: Generate k&w file
Step 5: Create basic k&w pattern
Step 6: Open and Position Shape
Step 7: Cut
Step 8: Expanding and completing
Set-in sleeve with V-neck
Basic rule: Set-in sleeve with V-neck
Step 1: Creating shape
Step 2: Loading and Adjusting Shapes in the ShapeWizard
Step 3: Set docking points
Step 4: Generate k&w file
Step 5: Create basic k&w pattern
Step 6: Open and Position Shape
Step 7: Cut
Step 8: Expanding and completing
Sleeve length compensation
Remaining narrowing in the inserted sleeve
Shoulder gore in the set-in sleeve
Exchange k&w Arrangement
Generate French shoulder with the ShapeWizard
French shoulder with collar and neck gore L0/L1
Basic rule: French shoulder with collar and neck gore L0/L1
Step 1: Creating shape
Step 2: Loading and Adjusting Shapes in the ShapeWizard
Step 3: Set docking points
Step 4: Generate k&w file
Step 5: Create basic k&w pattern
Step 6: Open and Position Shape
Step 7: Cut
Step 8: Expanding and completing
French shoulder with V-neck
Basic rule: French shoulder with V-neck
Step 1: Creating shape
Step 2: Loading and Adjusting Shapes in the ShapeWizard
Step 3: Set docking points
Step 4: Generate k&w file
Step 5: Create basic k&w pattern
Step 6: Open and position k&w file
Step 7: Cut
Step 8: Expanding and completing
Shoulder gore in French shoulder
Remaining narrowing in French shoulder
Shape elements in French shoulder
Narrowing, widening and binding-off types
Use different narrowing types
Multi-step narrowing / Doubling
Use different widening types
Use different binding-off types
k&w Basic Pattern
Knitting layers
Allocate and display knitting layers / column layers
Positioning and presentation
Mirror k&w Design to Knitting Layer L1
k&w Shape Pattern
k&w Options for Cut-out
Insert/Replace k&w Start
Yarn field settings
k&w Expanded Pattern
k&w Correction of Widening
k&w Starts in Overview
M1plus Shoes
General information
Feed wheels
EFS 820/920 Communication with CMS
General information on EFS programming
Sintral command DEVOUT
Use of the DEVOUT command with the M1plus
Control via Adapter "Switchable outputs"
Cam Conversions
Holding-deep by tuck function
Divided stitch cam
Other accessories
Yarn information
Yarn Count
By Length = count
By Weight
Conversion Formulas
Conversion table
Designation of synthetic fibers
General information on pattern creation
Creating patterns controlling the cast-off function via RS17
Control cast-off fabric via RS17 and piece counter (counter #100)
Knitting sequences with different structures [Leporello]
Color Arrangements for further knitting sequences
Pattern 1: Basic pattern Jacquard with different structures without shape
Generate pattern without shape
Draw the basic pattern modify the Stoll start
Complete the pattern
Pattern 2: Basic pattern Jacquard with different structures with shape
Draw the basic pattern modify the Stoll start
Create shape in the Symbol View [Basic]
Modify the height and the width of a shape in the Symbol View [Basic].
Draw the basic pattern modify the Stoll start
Complete the pattern
General information for gore technique with tubular structures.
Pattern 3: Basic pattern gored with separate front toe and tongue
Generate pattern without shape
Create shape in the Symbol View [Basic]
Modify the height and the width of a shape in the Symbol View [Basic].
Draw basic pattern
Complete the pattern
Pattern 4: Sickle shape 1
Generate pattern without shape
Draw basic pattern
Pattern areas with Color Arrangements
Complete the pattern
Pattern 5: Sickle shape 1 with separate toe cap and tongue
Generate pattern without shape
Draw basic pattern
Pattern areas with Color Arrangements
Complete the pattern
Pattern 5a: Toe cap and tongue
Generate pattern without shape
Draw basic pattern
Complete the pattern
Pattern 5b: Toe cap and tongue
Generate pattern without shape
Draw basic pattern
Complete the pattern
Pattern 6: Sickle shape 2 with structure
Create a pattern without shape and open the shape
Draw basic pattern
Complete the pattern
Pattern 7: Tool bag
Create a pattern without shape and open the shape
Draw basic pattern
Complete the pattern
Pattern 8: Leporello Box
Create a pattern without shape and open the shape
Draw basic pattern
Complete the pattern
M1plus Autarkic Direct Feed - ADF
General information
Intarsia - Distances of the yarn carriers
Single Jersey structure with ornamental stitch
Create Pattern
Create Ornamental Stitch
Settings in the Yarn Field Allocation dialog box
Complete the Pattern
Intarsia with petinet
Create Pattern
Draw basic pattern
Generate Color Arrangement
Settings in the Yarn Field Allocation dialog box
Complete the Pattern
Intarsia with different stitch tensions
Create Pattern
Draw basic pattern
Generate Color Arrangement
Settings in the Yarn Field Allocation dialog box
Complete the Pattern
Inverse Plating
Create Pattern
Draw basic pattern and define plating colors
Draw-in the Plating Colors in the Pattern.
Complete the Pattern
Intarsia combined with Inverse Plating
Create Pattern
Draw basic pattern
Generate Color Arrangement
Settings in the Yarn Field Allocation dialog box
Complete the Pattern
Selective Plating
Generate pattern without shape
Define Plating Colors and Draw Basic Pattern
Border Processing for Selective Plating
Settings in the Yarn Field Allocation dialog box
Complete the Pattern
Selective Plating Combined With Inverse Plating
Create Pattern
Define Plating Colors and Draw Basic Pattern
Border Processing for Selective Plating
Settings in the Yarn Field Allocation dialog box
Complete the Pattern
Stoll-ikat plating®
Create Pattern
Create the shape in the M1plus Shape Editor
Draw basic pattern and define plating colors
Draw-in the Plating Colors in the Pattern and load the shape.
Complete the Pattern
Combination of Stoll-ikat plating® with inverse plating
Create Pattern
Draw basic pattern and define plating colors
Complete the Pattern
Intarsia with ornamental seam
Create Pattern
Draw basic pattern
Generate Color Arrangements
Settings in the Yarn Field Allocation dialog box
Complete the Pattern
Ornamental Stitch via Placed Float
Create Pattern
Draw basic pattern
Generate Color Arrangements
Complete the Pattern
Weft Yarn - Insertion via Transfer with / without weft yarn presser foot
Create the shape in the M1plus Shape Editor
Generate pattern with shape
Draw basic pattern
Color Arrangement: Two Ways to Insert Weft Yarns
CA #1: Weft yarn and basic yarn are of the same thickness
CA #2: Weft yarn and basic yarn are of different thickness
Complete the Pattern
Weft yarn with ADF 530-32 W
Special features of ADF 530-32 W
How the weft yarn presser foot works
Activating and Deactivating the Weft Yarn Presser Foot
Create Pattern
Create the shape in the M1plus Shape Editor
Draw basic pattern
Function / programming of the weave-in presser foot
Generate Color Arrangement
Further possibility of pattern creation
Complete the Pattern
Schuss-Einstreifer Korrekturen ESCI
Weft Yarn + Weft Yarn Presser Foot - Half Milano Plated
Generate pattern without shape
Define Plating Colors and Draw Basic Pattern
Generate Color Arrangement
Complete the Pattern
Weft Yarn + Weft Yarn Presser Foot - Half Milano Plated + Structure
Generate pattern without shape
Define Plating Colors and Draw Basic Pattern
Draw Structure
Generate Color Arrangement
Complete the Pattern
Selective weft yarn inlay with weft yarn presser foot
Generate pattern without shape
Draw basic pattern with the area for the weft yarn
Generate Color Arrangement
Two variants for knitting in or out the yarn carriers of the area with selective weft yarn inlay
Border Processing of the Area with Selective Weft Yarn
Pattern Examples for Border Processing
Complete the Pattern
DJ Intarsia with Knitting-in Presser Foot
Working procedure of the knitting-in presser foot
Create Pattern
Draw basic pattern
Generate Color Arrangement
Manual changes in the basic pattern for the knitting-in presser foot
Complete the Pattern
Zusätzliche Themen
Intarsia mit grobem Bereich
Muster erstellen
Grundmuster zeichnen
Color Arrangement erstellen
Einstellungen im Dialog Garnfeldzuordnung
Muster fertigstellen
Schussfaden I-Variante
Muster erstellen
Grundmuster zeichnen
Color Arrangements erstellen
Muster fertigstellen
2x2 rib plated
Create the shape in the M1plus Shape Editor
Generate pattern with shape
Draw basic pattern and define plating colors
Complete the Pattern
Weft Yarn - Insertion via Knitting
Create Pattern
Draw basic pattern
Complete the Pattern
Closing Stitch with Reverse Yarn Carrier Run
Create the shape in the M1plus Shape Editor
Generate technical container module for widening and allocate to the shape
Generate pattern with shape
Complete the Pattern
Knitting sequence after technical processing
Function / programming of the weave-in presser foot
Intarsia Thread Supply
Intarsia with Yarn Carrier Type 2 (OIFF) - Machine and M1plus
Intarsia-Fadenführer Typ 2 für OKC - Maschinen
Maximale Bestückung der Fadenführer-Schienen - 2x16
Einstellungen an der Maschine OKC und der M1plus
Ermittlung der Bremswerte für Intarsia-Fadenführer an der Maschine
Abstände der Intarsia-Fadenführer bei der Programmierung
Möglichkeiten der Fadenführerschienen-Belegung
Globale Mustereinstellungen für Intarsia
Global Parameters: Anzahl Musterreihen, ab der ausgestrickt wird
Global Parrameters: Anzahl Nadeln, ab der eingestrickt wird
Global Parameters: Bindung Intarsia / Spickel
Global Parameters: Randbearbeitung
Globale Parameter: Einstricken / Ausstricken
Bremswert für Intarsia-Fadenführer ermitteln
Plating Kit
Double Bow Plating Yarn Carrier
Adjust the Double Bow Plating Yarn Carrier
Threading up the Double Bow Plating Yarn Carrier
Example for a plating pattern
Settings on the M1
Spare parts
Plating Yarn Carrier Carriage
Example for a plating pattern
Adjusting
Settings on the M1 and on the knitting machine
Spare parts
Holders for bobbins
Assembly
Connect the bobbin holder
Threading up
Spare parts
Plush Devices, Coarse and Fine
Plush equipment
Knitting technique
Assembly of plush attachment
Assembly - rear carriage box
Assembly - front carriage box
Plush device
Knitting Technique
Motif thread - Changing the insert position
Adjusting
Settings on the M1 and on the knitting machine
Working with the plush device
Assembly of plush attachment
Assembly - rear carriage box
Assembly - front carriage box
What else you should know
Glossar
Stichwortverzeichnis